[Public-List] False Keel area?

[Dominic Amann via Public-List]

Try using a magnet to determine the extent of the the iron.

On Sat, Jan 31, 2015 at 1:33 PM, wesley sherman via Public-List <
public-list at lists.alberg30.org> wrote:

> I am new to the forum and a long time reader.
> I am owner new owner of #397 and currently restoring her.
> I have a question that I hope someone will know.   I have been trying to
> find out how much of the keel and location of the alberg 30 iron is
> located.  I know on other Triton versions that alberge did there were some
> false keel areas near the rudder.
> Does anyone know if this exists in the 1969 Alberg. Or if there is some
> diagram that shows how it was build and location of the mass of iron ect or
> false keel.
> Final option would be to probe the keel keel to map it out with a fine
> long drill.
> I am about to move it off a cradle and onto boat stands and am a bit
> concerned if there is indeed a false keel area as in the tritons and other
> alberg designs. Currently I plan on not putting any blocks from three feet
> in from the keel foot.
> Any help would be appreciated.
> Wesley Sherman
>
>
>
>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



-- 



Where there is a shell, there is a way...

Dominic Amann
M 416-270-4587