[Public-List] Ice box insulation

[John Birch via Public-List]

Thinking of doing the same on our A-37.

I've been looking at Aerogel, R10 per inch. Trying to find it in thicker 
amounts rather than layering upon layering.

Seems the best for longevity, insulation and moisture resistance.

Cheers

John

----- Original Message ----- 
From: "Mike Lehman via Public-List" <public-list at lists.alberg30.org>
To: "A30 Public-List" <public-list at lists.alberg30.org>
Sent: Thursday, February 05, 2015 10:19 AM
Subject: [Public-List] Ice box insulation


> Has anyone attempted to improve the insulation to the ice box on a liner 
> boat? Yesterday I removed all of the cabinetry and counter top on the ice 
> box on our boat an found that it was an integrated piece of the liner. 
> There is no access between the ‘box’ and the surrounding liner. I did 
> measure the distance from the inside of the box to the outside of the 
> liner and there is only 1”-to-1.24” space. Hardly enough room for very 
> much insulation. The ONLY insulation I found (and removed) was some cheap 
> white foam under the countertop. I am trying to figure out how to improve 
> the efficiency of the ice box, but was wondering what others have done? 
> You advice and suggestion are appreciated.
>
> ~~~_/)_/)~~ Mike Lehman ~~_/)~~~
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>