[Public-List] Rudder shoe

[Greg Dawson via Public-List]

Hi there.
 
Who and where are Edson? I too need to replace my shoe as part of the refit.
 
Greg.
 
 
---- Original Message ----
From: Gordon Laco via Public-List <public-list at lists.alberg30.org>
To: DAVID <jdnomad75 at msn.com>; Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
Sent: Mon, Jun 22, 2015 8:43 pm
Subject: Re: [Public-List] Rudder shoe


Hi there.  

The original castings were made by Edson.    They claim to still
have the patterns for them...

Gord #426 Surprise. 

On 2015-06-22, at 8:17
PM, DAVID via Public-List <public-list at lists.alberg30.org> wrote:

> Help! 
Chuave needs a shoe. Does anyone have a spare rudder shoe or know of a source
for a replacement? Chuave is hull no. 156. The heads of the bronze machine
screws apparently corroded off and dropped the shoe in the deep. Luckily no
damage was done to the pintle and gudgeons. Until we can replace the shoe we'll
be tied to thecrock and wasting the summer. Any info or leads will be greatly
appreciated. We're located in southern Maryland very near Solomons, MD
>
Dave,Chuave, 156                         
>
_______________________________________________
> These businesses support your
Association:
> http://www.alberg30.org/store/A30supporters.html
> Please
support them.
> _______________________________________________
> Public-List
mailing list
> Public-List at lists.alberg30.org
>
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
_______________________________________________
These
businesses support your
Association:
http://www.alberg30.org/store/A30supporters.html
Please support
them.
_______________________________________________
Public-List mailing
list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org