[Public-List] Main shiv

[Glenn Brooks via Public-List]

Matt, if you are in Seattle, there is an outside chance I can make you a new sheeve, depending on what material is available on short notice.  fiber or Delrin can turned down in my lathe with out any effort. I have some tooling that can turn the sheeve end is that what it is called???  Where the rope lays...  As I remember the original fiber shelves were 6" diameter, the new synthetic OTC rope shelves I put on my new masthead are small, maybe 3" diameter with a small bronze bushing pressed through the center axle. No bid deal...

Contact me off line if you get into a bind and can't find a replacement. 

Regards
Glenn B.

Sent from my iPad

> On May 21, 2015, at 8:24 PM, Joseph Balderson via Public-List <public-list at lists.alberg30.org> wrote:
> 
> edlouchard at gmail.com
> $100
> He's in Seattle.
> On May 21, 2015 6:19 PM, "Fraser Kittson via Public-List" <
> public-list at lists.alberg30.org> wrote:
> 
>> Where are you located. I can provide a new halyard for you made from 3/8"
>> from mast to winch and the rest 3/16" Amsteel rope. Just doing mine now. I
>> would need the distance from the mast head to the sail in the dropped
>> position  as well as the hight of mast above deck. If you have a mast
>> mounted winch the I give  you a 36" tail. If you use a cabin top winch I
>> would need the distance from the base of the mast to the winch plus 36".
>> You can call me at 416-554-7457 if you want more info.
>> 
>> Fraser Kittson
>> 
>> 
>>>> On May 21, 2015, at 3:12 PM, Matthew Strickland via Public-List <
>>> public-list at lists.alberg30.org> wrote:
>>> 
>>> Let me first say that I feel like an idiot for letting this wait until
>> now; but I thought I'd checked my main shiv in the fall when I bought a new
>> halyard, converting to all rope from wire and rope. As it turns out
>> whatever I looked at in the fall was incorrect and I do, in fact, need a
>> new shiv. Unfortunately, because I waited so long, time has become a
>> factor. We are scheduled to splash on Saturday (the yard moved it up on me
>> from my originally scheduled Monday).
>>> 
>>> So a question to the group: does anyone have an extra shiv they'd be
>> willing to part with in rapid fashion?  Or know of someone who might have a
>> workable shiv in stock?
>>> 
>>> Thanks in advance for any help.
>>> 
>>> -Matt
>>> Vorticity - 416
>>> 
>>> Sent from my iPhone
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org