[Public-List] Standing rigging

[Gordon Laco via Public-List]

Good evening friends

Glenn's on the right track; and 1/2" pin fittings should be very common.  Where are you located? Perhaps we can direct you to a supplier 

Gord

On 2015-05-23, at 8:01 PM, Christine + Maurice via Public-List <public-list at lists.alberg30.org> wrote:

> Hello looking for assistance with rigging.  I am having the fore stay and back stay replaced and the rigger does not want to replace with thimble and nicropress as original.  Rigger is suggesting a toggle on the 1/2 pin at masthead and attached to a swage terminal. Which creates a universal joint.   Problem is we are having a hard time sourcing this hardware. My Alberg  seems to have the original setup.  Any guidance on how you have your rigging secured at the mast head would be greatly appreciated.
> 
> Cheers,
> 
> Maurice 
> Avoca #322
> 
> 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org