[Public-List] Public-List Digest, Vol 3040, Issue 1

[Gordon Laco via Public-List]

I guess she was concerned that heat might affect the glue in veneer... But
I've never had a problem.  I like using heat because it causes the least
amount of wood to be removed with the coating.

I did this job to SURPRISE's floorboards last season

Gord #426 Surprise


On 29/05/15 2:09 PM, "Stephen gwyn via Public-List"
<public-list at lists.alberg30.org> wrote:

> My neighbour, used to be (ahem) a professional stripper. She
> recommends heat for most applications, but not for anything
> with a thin veneer, like the floor boards. She was
> working in the Caribbean however, so she can't recommend a brand.
> 
> So... thoughts?
> 
> SG
>