[Public-List] MAST SUPPORT BEAM

[Jeffrey via Public-List]

James,

I replaced mine in 2013, and I just used the existing beam to build a
laminating mold for the new beam. The existing beam came out of the boat
easily and in one piece. It wasn't that difficult in the end, should have
done this sooner.

My new beam is made from white oak, and is built a bit taller and thicker
than the original.

I've got some images up here.

http://sailboatseagrass.com/mast-beam-project/

Jeff


Seagrass. #116
Boothbay Harbor, Maine
http://sailboatseagrass.com/

<http://instagram.com/jfongemie>


On Thu, Nov 5, 2015 at 5:40 PM, JAMES DAY via Public-List <
public-list at lists.alberg30.org> wrote:

> I am sure that this has been discussed, but I cant find a search window.
>
> Please advise if any drawings are available to make a new beam to replace
> the wood one that supports the mast on top of cabin. Would like to replace
> this before leaving this winter. I have access to a shop to make one from
> metal, but would like to have a set of drawings, at least the over all
> measurements, and curve. thanks for any help, feel free to send pm to
> junkflyboy at yahoo dot com
>
>
> thank you in advance
>
>
> James Richard day (retired having a ball)
>
>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



-- 
______________

Jeffrey Fongemie

<http://instagram.com/jfongemie>