[Public-List] chainplates

[Wes Gardner via Public-List]

Yes, at first I was considering bonding the chain plate to either the knee or bulkhead but I think maybe the crevice corrosion factor may prevent that. 

Sent from my iPhone

> On Nov 3, 2015, at 7:10 PM, Randy Katz via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Greetings,
> 
> Was it Wes talking about replacing bolts and gooping over with 5200? If I
> understand the comment correctly, I'd suggest using something other than
> 5200 so access to the bolts could easily be had at a later date. Also,
> leaving the SS hardware open to the air as much as possible can reduce
> possibilities of crevice  corrosion.
> 
> My apologies if I misunderstood the post!
> 
> Regards,
> 
> Randy Katz
> #249 Simple Gifts
> Bellingham/Seattle WA
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org