[Public-List] MAST SUPPORT BEAM

Gordon Laco via Public-List public-list at lists.alberg30.org
Fri Nov 6 06:08:41 PST 2015


Hello Chip,

Ours is good and I've not heard of a liner boat having difficulty in this
area.  What I have heard of is water degrading the balsa core in the area
under the mast step.  Ours seems good in that area so far...

Gord #426 Surprise


On 2015-11-06, 9:06 AM, "Chip Dance via Public-List"
<public-list at lists.alberg30.org> wrote:

> Has anyone ever found it necessary to replace/rebuild/reinforce the mast beam
> on a liner boat? Or was Whitby successful in that upgrade? 

Chip
#456 

Sent
> using a stone tablet and chisel. 


-------- Original message --------
From:
> Jeffrey via Public-List <public-list at lists.alberg30.org> 
Date: 11/06/2015
> 4:54 AM  (GMT-07:00) 
To: JAMES DAY <junkflyboy at yahoo.com>, Alberg 30 Public
> List -- open to all <public-list at lists.alberg30.org> 
Subject: Re:
> [Public-List] MAST SUPPORT BEAM 

James,

I replaced mine in 2013, and I just
> used the existing beam to build a
laminating mold for the new beam. The
> existing beam came out of the boat
easily and in one piece. It wasn't that
> difficult in the end, should have
done this sooner.

My new beam is made from
> white oak, and is built a bit taller and thicker
than the original.

I've got
> some images up 
> here.

http://sailboatseagrass.com/mast-beam-project/

Jeff


Seagrass.
> #116
Boothbay Harbor,
> Maine
http://sailboatseagrass.com/

<http://instagram.com/jfongemie>


On Thu,
> Nov 5, 2015 at 5:40 PM, JAMES DAY via Public-List
> <
public-list at lists.alberg30.org> wrote:

> I am sure that this has been
> discussed, but I cant find a search window.
>
> Please advise if any drawings
> are available to make a new beam to replace
> the wood one that supports the
> mast on top of cabin. Would like to replace
> this before leaving this winter.
> I have access to a shop to make one from
> metal, but would like to have a set
> of drawings, at least the over all
> measurements, and curve. thanks for any
> help, feel free to send pm to
> junkflyboy at yahoo dot com
>
>
> thank you in
> advance
>
>
> James Richard day (retired having a ball)
>
>
>
>
>
> _______________________________________________
> These businesses support
> your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please
> support them.
> _______________________________________________
> Public-List
> mailing list
> Public-List at lists.alberg30.org
>
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



--
> 
______________

Jeffrey
> Fongemie

<http://instagram.com/jfongemie>
___________________________________
> ____________
These businesses support your
> Association:
http://www.alberg30.org/store/A30supporters.html
Please support
> them.
_______________________________________________
Public-List mailing
> list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/pub
> lic-list-alberg30.org
_______________________________________________
These
> businesses support your
> Association:
http://www.alberg30.org/store/A30supporters.html
Please support
> them.
_______________________________________________
Public-List mailing
> list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/pub
> lic-list-alberg30.org






More information about the Public-List mailing list