[Public-List] PULLEY AT TOP OF MAST

JAMES DAY via Public-List public-list at lists.alberg30.org
Sun Oct 18 05:21:10 PDT 2015


My cable that lifts the main sail has jumped off the pulley inside the mast two times now, once in VERY BAD weather and once on a sunny afternoon.

The sail is currently stuck 3/4 way up and I would like to know if there is a repair for this, short of removing the mast and rebuilding the pulley area to stop this problem??

Has any one replaced the pulley with a block on the aft side of the mast, and if so what size block? My thoughts was to install a double block (over and under) where the boom block is installed. I am not an engineer, so have question. Is the bolt that holds the block for the boom would be strong enough to also hold the weight of pulling the main sail up??

Thank you for any advice or experience with this problem, I have enjoyed My Alberg for the last eight years and have sailed her for many thousand miles according to my chart plotter. She has really brought me many many days of pleasure mixed with a few times of shear terror.

Jim Day at Clearwater Beach, Florida


More information about the Public-List mailing list