[Public-List] Throttle lever tension

[Michael Grosh via Public-List]

A wire clamp ( u bolt, saddle, and a couple of nuts) around the cable
tightened to taste will do the trick.

MichaelGrosh
#220
Does anybody with a diesel have a single lever/2 cable control? How does
the engine shut down (closing the fuel rack completely)? MG
On Oct 22, 2015 2:52 PM, "Bill Newman via Public-List" <
public-list at lists.alberg30.org> wrote:

> Hello everyone,
>
> This season my throttle cable on #233 seized up.  I replaced it with a new
> one but now there is almost no tension when moving the throttle lever so it
> moves too easily.  I thought that there should be some tensioning
> adjustment on the lever mechanism but I cannot find any.
>
> Has anyone had this problem and does anyone have any ideas of how to
> increase the throttle lever tension a bit? It does not seem to move on its
> own but will with the lightest brush pass.  I rigged an aluminum guard
> several years ago to eliminate accidentally knocking the lever but with the
> new cable, a pant leg brushing past can move it.
>
> Any suggestions will be appreciated.
>
> Bill Newman
> Marion Rose III
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>