[Public-List] V-berth platform

[Glenn Brooks via Public-List]

Brent,  

If you have the original joinery work still installed you can screw some 1"X1" wood cleats around the inside of the existing berths, and fabricate a trapezoidal piece of plywood to fill the gap. Then put a cushion in the center space and your good to go!

Glenn B.

Sent from my iPad

> On Oct 27, 2015, at 7:47 PM, Brent Higgins via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Hi Guys, 
> I'd like to build a platform for my v-berth, so it's a full bed. it's a 1968 pre-liner. I'm wondering if anyone has dimensions/plans already laid out on paper that could be shared, I'd really appreciate it. I searched the old threads and couldn't find anything. If you recall a conversation where this has already been discussed, feel free to point me to that. Don't want to rehash anything that's already been covered.
> - Brenton
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org