[Public-List] Water intakes

Tue Sep 22 09:15:30 PDT 2015

Hi All,

I apologize for hijacking the thread...the plumbing concerns got me to
thinking about how well someone refitted my boat and ,well, one thing led
to another...sorry

Wes

On Tue, Sep 22, 2015 at 11:43 AM, Wes Gardner <wesgardner1952 at gmail.com>
wrote:

> Sorry, I misspoke looks like the headstay has a toggle and swage fitting
> as it is a roller...
>
> On Tue, Sep 22, 2015 at 11:34 AM, Wes Gardner <wesgardner1952 at gmail.com>
> wrote:
>
>> I'll shoot you a pic...
>>
>> On Tue, Sep 22, 2015 at 11:32 AM, David Van Denburgh <
>> denburgh at andrews.edu> wrote:
>>
>>> Wes,
>>>
>>> Out of curiosity, how was your masthead modified to fit the Sta-Lok
>>> terminal(s)? I have a box full of Sta-Loks that I plan to use when I re-rig
>>> Tradewinds, but I was bummed to discover that the masthead slot is so
>>> ridiculously narrow that only a swage fitting will fit.
>>>
>>> David
>>>
>>> -----Original Message-----
>>> From: Public-List [mailto:public-list-bounces at lists.alberg30.org] On
>>> Behalf Of Wes Gardner via Public-List
>>> Sent: Tuesday, September 22, 2015 11:29 AM
>>> To: Stephen Gwyn <stephen.gwyn at nrc-cnrc.gc.ca>; Alberg 30 Public List
>>> -- open to all <public-list at lists.alberg30.org>
>>> Subject: Re: [Public-List] Water intakes
>>>
>>> Hi All,
>>>
>>> I think I'd like to shake the hand of whoever upgraded my boat.  The
>>> wiring has all been redone and secured in wire ties, the lower shrouds'
>>> chainplates have the larger bolts, the mast support includes the
>>> aluminum plates, the small thruhulls were changed out.  There is an issue
>>> with the Perko battery switch in that no position turns off battery #1.
>>> The switch just parallels battery #2...odd.  I read recently about a boat
>>> that is undergoing extensive deck recoring...ouch...mine seems to be dry as
>>> a bone although my cockpit sole is soft.  Mine is a nonliner boat #196 and
>>> has apparently been very well taken care of.  The rig uses Sta Lok
>>> terminations.  The boat has been AwlGripped all the way around.  The bottom
>>> is beautiful...dunno if it's been barrier coated or not?
>>>
>>> I am moving along the path of having the engine rebuilt after the oil
>>> pressure sender debacle.  If you have a non-standard oil pressure gauge,
>>> I'd check to see if it was done properly.
>>>
>>> For those considering the electric alternative, I was quoted a Thoosa
>>> 9000 with batteries for a mere $11,000 and some change uninstalled...ouch
>>>
>>> Wes
>>>
>>> On Tue, Sep 22, 2015 at 10:55 AM, Stephen Gwyn via Public-List <
>>> public-list at lists.alberg30.org> wrote:
>>>
>>> >
>>> > I guess I'm OK with the basic design of the plumbing.
>>> > I don't want fewer connections, or have the connections moved. What I
>>> > object to is the execution of the design with hoses stretched over
>>> > pipes which are too fat (stretching the hoses) and too short (only
>>> > allowing one hose clamp) instead of barbs. And using non-stainless
>>> > hose-clamps, even above the waterline, is also unpardonable. Whitby
>>> > saved, what? maybe 20$ in 1972.
>>> > No recently built boat, despite being ugly as sin and sailing like a
>>> > pregnant cow, would ever take a shortcut like that.
>>> >
>>> > Grr.
>>> >
>>> > SG
>>> >
>>> >
>>> >
>>> > --
>>> >
>>> ------------------------------------------------------------------------
>>> > Stephen Gwyn                       | Tel: 1-250-363-3136
>>> > Canadian Astronomical Data Centre  | Fax: 1-250-363-0045 Herzberg
>>> > Institute of Astrophysics | Cell: 1-250-885-6969
>>> > 5071 West Saanich Road             | E-mail:
>>> Stephen.Gwyn at nrc-cnrc.gc.ca
>>> > Victoria, BC, V9E 2E7, Canada      |
>>> http://astrowww.phys.uvic.ca/~gwyn/
>>> > ----------------------------------------------------------------------
>>> > --
>>> >
>>> > _______________________________________________
>>> > These businesses support your Association:
>>> > http://www.alberg30.org/store/A30supporters.html
>>> > Please support them.
>>> > _______________________________________________
>>> > Public-List mailing list
>>> > Public-List at lists.alberg30.org
>>> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> >
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>
>>
>>
>