[Public-List] Water tank

Stephen gwyn via Public-List public-list at lists.alberg30.org
Wed Sep 9 11:07:50 PDT 2015


My water tank is about 25 gallons, as measured by timing how long
my hose takes to fill a 5 gallon jug and then measuring how long
the same hose takes to fill the tank.

Here's a link to replacing the aluminum top of the water tank:
http://www.alberg30.org/maintenance/Plumbing/WatertankRepair/
It's moderate bit of work.

What I did instead was to reuse the aluminum top, but coated
with epoxy. I used the WEST System 860 Aluminum Etch Kit first.
I didn't coat the fibreglass bottom of the tank, but I should
have. I also probably would track down some foodsafe epoxy,
although, if mixed correctly, regular epoxy should be fine.

As for the sealant to attach the tank top, I talked to a
chemical engineer at BoatLIFE about food safety. She said
to use Life-Calk polysulfide sealant. She said not to use
the various polyurethane (Sikaflex/3m5200) and that no
marine silicone sealants are foodsafe.


SG

Quasar #495



-- 
------------------------------------------------------------------------
Stephen Gwyn                       | Tel: 1-250-363-3136
Canadian Astronomical Data Centre  | Fax: 1-250-363-0045
Herzberg Institute of Astrophysics | Cell: 1-250-885-6969
5071 West Saanich Road             | E-mail: Stephen.Gwyn at nrc-cnrc.gc.ca
Victoria, BC, V9E 2E7, Canada      | http://astrowww.phys.uvic.ca/~gwyn/
------------------------------------------------------------------------



More information about the Public-List mailing list