[Public-List] Exhaust system

[Wes Gardner via Public-List]

Hi John,

You might try Chris Oliver at Portside Marine in Annapolis.  (410)
263-3302.  He will know.

Wes

On Tue, Sep 8, 2015 at 10:38 AM, John Brugeman via Public-List <
public-list at lists.alberg30.org> wrote:

> I have an exhaust problem.  I have Alberg #305 (1968) with the water
> injected muffler in the aft lazaret.  Not sure what you call that type of
> muffler.  This whole system is probably original to the boat as I am only
> the second owner.  The tube that runs from the engine to the muffler is
> broken just before it enters the muffler.  Maybe an inch or two before.
> This whole unit is wrapped of course.  What is the tubing made of and what
> is the diameter of the tubing? The muffler itself seems to be fine.  Also
> as the exhaust exits the boat I'm getting white smoke (probably what seems
> to be steam).  What would be causing that and is that normal? Are there
> fittings along the tube anywhere between the engine and the muffler?  Is
> the water entering the muffler from the engine water pump or from a
> separate pump?  I would probably replace the exhaust hose and the water
> hose at the same time.  I know this is a lot of questions but any
> suggestions or answers would be greatly appreciated before I tackle this
> job.
> John BMermaid #305
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>