[Public-List] Cockpit drain fittings

[Mike Lehman via Public-List]

Stephen

What hull number is your boat? The liner boats share the cockpit drain with the internal deck drain. I have seriously considered elimating the "T" fitting behind the engine and running the deck drain aft to an 'above the water line' thru hull fitting next to the engine exhaust on port and bilge pump exit on starboard. It would elimated hoses running thru the sail lockers and make the cockpit drains more effective. Anyone done this?

--- Original Message ---

From: "Stephen gwyn via Public-List" <public-list at lists.alberg30.org>
Sent: September 10, 2015 2:06 PM
To: public-list at lists.alberg30.org
Subject: [Public-List] Cockpit drain fittings


Hi,

I'd like to replace the molded-in cockpit drain fittings.
Has anybody done this? What did they use?

SG

--
------------------------------------------------------------------------
Stephen Gwyn                       | Tel: 1-250-363-3136
Canadian Astronomical Data Centre  | Fax: 1-250-363-0045
Herzberg Institute of Astrophysics | Cell: 1-250-885-6969
5071 West Saanich Road             | E-mail: Stephen.Gwyn at nrc-cnrc.gc.ca
Victoria, BC, V9E 2E7, Canada      | http://astrowww.phys.uvic.ca/~gwyn/
------------------------------------------------------------------------
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org