[Public-List] rigging asym

Lawrence Morris via Public-List public-list at lists.alberg30.org
Thu Aug 25 18:58:10 PDT 2016


Wes and Michael,

I would not do outside jibes. You run a high risk of running over the lazy sheet.  A much worse result than dragging the sail thru the triangle .  

One way to create more room is to ease the tackline 5ft.Before the jibe.

Much safer. 

Larry. Solstice 501



Larry 

Sent from my iPad

> On Aug 25, 2016, at 7:38 PM, Wes Gardner via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Hi Michael,
> 
> Yes, in fact, I've done it singlehanded without an auto-pilot...the first time I tried it I accidentally did an "inside" jibe, stuffing it just ahead of the rolled up jib.  With a little more breeze, an "outside" works OK. You need to have very long sheets for the "outside" as the clew needs to "flap out in front like a flag" then you turn and haul in the new active sheet.
> 
> Easier with more people.
> 
> Wes
> 
>> On Aug 25, 2016, at 6:44 PM, Michael Connolly via Public-List <public-list at lists.alberg30.org> wrote:
>> 
>> Put a clipper bow on her with a "real" wooden bowsprit. 
>> 
>> The sprit comes in handy after you learn how to gibe the asymmetrical sail. Selden's sprit can be fitted with a roller furler on the end. To gibe furl sail and then deploy on the other side. 
>> 
>> Wes, with your set up I assume you don't attempt to gibe the A sail? Or do you have crew to go forward and walk it around? 
>> 
>> Michael 
>> 
>> 
>> ----- Original Message -----
>> 
>> From: "Gerard Kuperus via Public-List" <public-list at lists.alberg30.org> 
>> To: public-list at lists.alberg30.org 
>> Sent: Thursday, August 25, 2016 6:01:15 PM 
>> Subject: Re: [Public-List] rigging asym 
>> 
>> I don't think a tube looks good on the bow of a classic boat such as the A30. I saw some carbon sprit (csprit?) that can be folded up and would imho look better, but this stuff is not cheap! I was thinking about (at some point) having a stainless steel sprit made that fits on the bow. 
>> 
>> However, after reading these posts I am thinking a sprit is not necessary at all, since people fly assymetricals 
>> 
>> 
>> PS I have had some trouble replying to messages, so if you did not receive a reply after you send me helpful suggestions for replacing my rigging, please let me know. I am going to actually do it later in September, right in time for the lighter fall and winter winds :) 
>> _______________________________________________ 
>> These businesses support your Association: 
>> http://www.alberg30.org/store/A30supporters.html 
>> Please support them. 
>> _______________________________________________ 
>> Public-List mailing list 
>> Public-List at lists.alberg30.org 
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
>> 
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



More information about the Public-List mailing list