[Public-List] rigging asym

via Public-List public-list at lists.alberg30.org
Fri Aug 26 06:40:49 PDT 2016


I have a moveable bow sprit combined with a selden furler. My aspin is
a doyle UPS sail. Works like a dream. I furl rather than gybe - easier
and less chance of damaging the sail. The set up was worth every penny
I paid for it. It works well and can be single handed.
David, 432

	-----------------------------------------From: "Lawrence Morris via
Public-List" 

To: "Wes Gardner", "Alberg 30 Public List -- open to all"
Cc: "Gerard Kuperus"
Sent: Thu, 25 Aug 2016 21:58:10 -0400
Subject: Re: [Public-List] rigging asym

 Wes and Michael,

 I would not do outside jibes. You run a high risk of running over the
lazy sheet. A much worse result than dragging the sail thru the
triangle . 

 One way to create more room is to ease the tackline 5ft.Before the
jibe.

 Much safer. 

 Larry. Solstice 501

 Larry 

 Sent from my iPad

 > On Aug 25, 2016, at 7:38 PM, Wes Gardner via Public-List  wrote:
 > 
 > Hi Michael,
 > 
 > Yes, in fact, I've done it singlehanded without an auto-pilot...the
first time I tried it I accidentally did an "inside" jibe, stuffing it
just ahead of the rolled up jib. With a little more breeze, an
"outside" works OK. You need to have very long sheets for the
"outside" as the clew needs to "flap out in front like a flag" then
you turn and haul in the new active sheet.
 > 
 > Easier with more people.
 > 
 > Wes
 > 
 >> On Aug 25, 2016, at 6:44 PM, Michael Connolly via Public-List 
wrote:
 >> 
 >> Put a clipper bow on her with a "real" wooden bowsprit. 
 >> 
 >> The sprit comes in handy after you learn how to gibe the
asymmetrical sail. Selden's sprit can be fitted with a roller furler
on the end. To gibe furl sail and then deploy on the other side. 
 >> 
 >> Wes, with your set up I assume you don't attempt to gibe the A
sail? Or do you have crew to go forward and walk it around? 
 >> 
 >> Michael 
 >> 
 >> 
 >> ----- Original Message -----
 >> 
 >> From: "Gerard Kuperus via Public-List"  
 >> To: public-list at lists.alberg30.org 
 >> Sent: Thursday, August 25, 2016 6:01:15 PM 
 >> Subject: Re: [Public-List] rigging asym 
 >> 
 >> I don't think a tube looks good on the bow of a classic boat such
as the A30. I saw some carbon sprit (csprit?) that can be folded up
and would imho look better, but this stuff is not cheap! I was
thinking about (at some point) having a stainless steel sprit made
that fits on the bow. 
 >> 
 >> However, after reading these posts I am thinking a sprit is not
necessary at all, since people fly assymetricals 
 >> 
 >> 
 >> PS I have had some trouble replying to messages, so if you did not
receive a reply after you send me helpful suggestions for replacing my
rigging, please let me know. I am going to actually do it later in
September, right in time for the lighter fall and winter winds :) 
 >> _______________________________________________ 
 >> These businesses support your Association: 
 >> http://www.alberg30.org/store/A30supporters.html [1] 
 >> Please support them. 
 >> _______________________________________________ 
 >> Public-List mailing list 
 >> Public-List at lists.alberg30.org 
 >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
[2] 
 >> 
 >> _______________________________________________
 >> These businesses support your Association:
 >> http://www.alberg30.org/store/A30supporters.html
 /> >> Please support them.
 >> _______________________________________________
 >> Public-List mailing list
 >> Public-List at lists.alberg30.org
 >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 /> > _______________________________________________
 > These businesses support your Association:
 > http://www.alberg30.org/store/A30supporters.html
 /> > Please support them.
 > _______________________________________________
 > Public-List mailing list
 > Public-List at lists.alberg30.org
 > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 /> _______________________________________________
 These businesses support your Association:
 http://www.alberg30.org/store/A30supporters.html
 /> Please support them.
 _______________________________________________
 Public-List mailing list
 Public-List at lists.alberg30.org
 http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 /> 

Links:
------
[1] http://www.alberg30.org/store/A30supporters.html
[2] http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org




More information about the Public-List mailing list