[Public-List] More Chainplates

Jason S via Public-List public-list at lists.alberg30.org
Sun Feb 7 13:15:13 PST 2016


That's is what mine were when I took them out. I made replacements out of
1.5x.250.....doesn't sound like much difference but when held next to each
other considerable difference and I'm glad I did it.

Jason
#457
On Feb 7, 2016 4:11 PM, "Jonathan Bresler via Public-List" <
public-list at lists.alberg30.org> wrote:

> Far as I can make out without having removed the chainplates, the are all
> 1-1/4" wide and 3/16" thick.
>
> Expect that the length may be different for different pairs, but would hope
> that they each pair are the same length.
>
> Jonathan
>
> On Sunday, February 7, 2016, JS via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> >
> >
> > All of my chain plates had different bends in them to make them exit the
> > deck in the correct spot and have proper alignment with shrouds/stays.  I
> > think the only 100% straight one is the backstay chainplate.These boat
> sure
> > weren't built to exact specifications.
> > Jason#457
> >
> > Sent from my Verizon Wireless 4G LTE smartphone
> >
> > -------- Original message --------
> > From: Greg Hounsell via Public-List <public-list at lists.alberg30.org
> > <javascript:;>>
> > Date: 02/07/2016  2:54 PM  (GMT-05:00)
> > To: public-list at lists.alberg30.org <javascript:;>
> > Subject: [Public-List] More Chainplates
> >
> > Afternoon;
> > I didn't want to hijack the Chainplates knee thread so thought I would
> ask
> > afresh.  Hull #592 - I have currently removed only the stbd forward
> > chainplate and cut out the old soft knee. Couple of questions to start:
> >
> > 1/ the removed chainplate has a slight "S" bend in it that starts just
> > above the top bolt hole. The bend offset is about 3/16". There is some
> > deformation at the top of the knee so I am guessing this bend is NOT
> > supposed to be there? Can anyone set me straight on what is supposed to
> be?
> >
> > 2/ since I have not removed the other chainplate yet are the other shroud
> > chainplate all the same size? Etc?
> >
> > Thanks!
> > Greg Hounsell
> > #592 Impromptu
> >
> > Sent from Samsung Mobile
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org <javascript:;>
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org <javascript:;>
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> --
> Jonathan M Bresler
> Alberg 30 #262
> Annapolis/Eastport MD
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



More information about the Public-List mailing list