[Public-List] Opening ports

[Wes Gardner via Public-List]

Once again, someone has done me a very good turn over the years as none of
my ports leak (except for the small one that's leaking from the gasket).
Not sure what they were bedded with originally but I think I'm going to
leave well enough alone.  My plexi is beginning to show crazing but my boat
has curtains (I know, cute, huh ;-) so I rarely need to look out the
windows anyway.

On Mon, Feb 8, 2016 at 10:17 PM, Brian Zinser <bzinser at nmu.edu> wrote:

> Yes, they sell a repair kit. I spoke with someone at the firm a couple of
> years ago.
>
> -----Original Message-----
> From: Public-List [mailto:public-list-bounces at lists.alberg30.org] On
> Behalf
> Of Wes Gardner via Public-List
> Sent: Monday, February 8, 2016 9:27 PM
> To: Gordon Laco <mainstay at csolve.net>; Alberg 30 Public List -- open to
> all
> <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Opening ports
>
> Gord,
>
> Do you think they still sell gaskets? I have three, one leaks a bit and the
> other two aren't leaking but I'm afraid to open them in fear they'll start
> leaking due to old gaskets.
>
> Wes
>
> > On Feb 8, 2016, at 7:49 PM, Gordon Laco via Public-List
> <public-list at lists.alberg30.org> wrote:
> >
> > I reckon that firm in Toronto was Atkins&Hoyle. Not in T.O anymore, but
> still run by the same people.  They're across the isle from me at the
> boatshow every year.
> >
> > I reckon the ports will cost a lot more today.
> >
> > Gord #426 Surprise.
> >
> >> On 2016-02-08, at 7:25 PM, Brian Zinser via Public-List
> <public-list at lists.alberg30.org> wrote:
> >>
> >> My boat (now owned by James Baldwin) has opening ports. I have the
> >> price list of optional equipment. The opening ports with screens were
> $40
> each.
> >>
> >> They were made by a firm in Toronto.
> >>
> >> Brian Zinser
> >> Former owner of #134
> >>
> >> -----Original Message-----
> >> From: Public-List [mailto:public-list-bounces at lists.alberg30.org] On
> >> Behalf Of bill ydel via Public-List
> >> Sent: Monday, February 8, 2016 5:37 PM
> >> To: public-list at lists.alberg30.org
> >> Subject: [Public-List] Opening ports
> >>
> >> For those of you who have upgraded to opening ports, what did you
> >> install and how did it go?
> >>
> >> Bill Ydel
> >> SallyB #441
> >>
> >> Sent from my iPad
> >> _______________________________________________
> >> These businesses support your Association:
> >> http://www.alberg30.org/store/A30supporters.html
> >> Please support them.
> >> _______________________________________________
> >> Public-List mailing list
> >> Public-List at lists.alberg30.org
> >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >>
> >> _______________________________________________
> >> These businesses support your Association:
> >> http://www.alberg30.org/store/A30supporters.html
> >> Please support them.
> >> _______________________________________________
> >> Public-List mailing list
> >> Public-List at lists.alberg30.org
> >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>