[Public-List] What wood....

JS via Public-List public-list at lists.alberg30.org
Mon Feb 15 05:21:27 PST 2016


    
I am no wood worker and have very little knowledge on the stuff but I have seen guys use Sapele wood to repack teak on other refits. My understanding is that it in the mahogany family.
There was an Alberg in my marina a few years back #449 that had a beautiful Ipe toe rail. Ipe is used in decking and relatively inexpensive 
These are just a few of the example of teak alternatives I have seen.
Good luck with your project
Jason#457Www.svsalacia.blogspot.com 


Sent from my Verizon Wireless 4G LTE smartphone

-------- Original message --------
From: Greg Dawson via Public-List <public-list at lists.alberg30.org> 
Date: 02/15/2016  7:34 AM  (GMT-05:00) 
To: public-list at lists.alberg30.org 
Subject: [Public-List] What wood.... 


Hi Guys

Alternatives to teak? The woodwork on our boat is in poor shape, the hatch covers are falling to pieces and the toe rail has been cut in a couple of places. The teak trim on the stern is snapped in two and the boards either side of the cockpit are badly weathered. To add to this the mild steel bolts holding our toe rail down are so rusted that they are snapping when you try to adjust them. 

I'm looking to replace the toe rail with an aluminum system once I find something appropriate, does anyone have any ideas? Also, replacement teak for the hatches etc is simply out of our price range (lots of other stuff to buy with that money) and I am looking at alternatives, any ideas? Is there any reason for instance that I can't use ash or cherry provided that I accept the additional work of varnishing each season? 

Finally, on the subject of mast beams, is there an engineered drawing kicking around that I could work off to produce my new beam. Currently it has the Frankenstein bolts and aluminum plates. Nothing is quite lining up as it should and I am wary of using the damaged beam as a template. I have to renew the bulkheads as they are rotten around the chain plates so I might as well do the beam to at the same time. Any ideas?

Thanks 

Greg.
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


More information about the Public-List mailing list