[Public-List] More Chainplates

[Wes Gardner via Public-List]

Hi All,
When I took mine out last fall to drill them out for the 5/16" bolts, they were all flat...no offsets that I recall.

Wes #196 Griffin's Faith

> On Feb 7, 2016, at 2:54 PM, Greg Hounsell via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Afternoon; 
> I didn't want to hijack the Chainplates knee thread so thought I would ask afresh.  Hull #592 - I have currently removed only the stbd forward chainplate and cut out the old soft knee. Couple of questions to start:
> 
> 1/ the removed chainplate has a slight "S" bend in it that starts just above the top bolt hole. The bend offset is about 3/16". There is some deformation at the top of the knee so I am guessing this bend is NOT supposed to be there? Can anyone set me straight on what is supposed to be?
> 
> 2/ since I have not removed the other chainplate yet are the other shroud chainplate all the same size? Etc?
> 
> Thanks! 
> Greg Hounsell
> #592 Impromptu
> 
> Sent from Samsung Mobile
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org