[Public-List] Question on removal of sliding hatch on 1977 Alberg

Wes Gardner via Public-List public-list at lists.alberg30.org
Fri Jul 15 12:10:16 PDT 2016


Hi All,

My hatch was in such bad shape that I could just lift it off. Mine's an early boat so it has no sea hood. This discussion seems to back up my idea of reinstallation. I was wondering about the offset screwdriver vs. removal of one side of track.

Wes

> On Jul 15, 2016, at 2:35 PM, Bill McCoy via Public-List <public-list at lists.alberg30.org> wrote:
> 
> After exhausting my limited knowledge of basic cabinetry I would like guidance on how I might remove the sliding hatch cover on my Alberg so that I might work on the teak surface in a protected environment which is not 100 degrees.  I have removed the forward "turtle" protective cuddy yet cannot determine where the secret notch is which will permit me to extract the sliding hatch.  
> 
> Skeep 
> Hull #614
>                         
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



More information about the Public-List mailing list