[Public-List] furling gear and spinnaker halyard

Kris Coward via Public-List public-list at lists.alberg30.org
Thu Jun 23 12:43:25 PDT 2016


Put a halyard restrainer on the front of the mast to help keep the jib
and spin halyards clear enough of each other to keep this problem at
bay. I figured this one out the hard way (by breaking the forestay with
(jib) halyard wrap before putting the restrainer on--fortunately I was
able to rig up the spare halyard as an emergency forestay before the rig
got any ideas about falling over).

-Kris

On Thu, Jun 23, 2016 at 03:39:13PM -0400, charles pleisse via Public-List wrote:
> Sookie has a spinnaker and most of the associated gear.  It all seems to be
> original to the boat.  Furling gear was installed in the mid 80's.  I
> believe the spinnaker hasn't been used since.  I discovered why last year.
> As many of you probably know, the spinnaker halyard interferes with the
> upper parts of the furling gear.  Is there any way to rig a spinnaker
> halyard on an original mast head that will not interfere with the furler?
> 
> Charles Pleisse
> Sookie #221
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

-- 
Kris Coward					http://unripe.melon.org/
GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3



More information about the Public-List mailing list