[Public-List] 1975 bilge leak

Chip Dance via Public-List public-list at lists.alberg30.org
Tue Mar 1 17:35:30 PST 2016


No plywood liner on #456 either. 

I too recently cut out part of the bilge encapsulation as water was obviously passing through /around it.  I found some cement or sand under the glass. Was the steel ballast topped off with cement or sand? When I re-encapsulate the ballast,  should I be concerned about replacing any of that cement /sand? 

Thanks 
Chip #456

Sent using a stone tablet and chisel. 


-------- Original message --------
From: Kris Coward via Public-List <public-list at lists.alberg30.org> 
Date: 03/01/2016  5:46 PM  (GMT-07:00) 
To: Greg Hounsell <greg.hounsell at gmail.com>, Alberg 30 Public List -- open to all <public-list at lists.alberg30.org> 
Subject: Re: [Public-List] 1975 bilge leak 


Candy Cane's also a 1975 (#583) and has no such floor in the bilge. My
hunch would be that it's a previous owner addition, and can be safely
removed.

Hope this helps,
Kris

On Tue, Mar 01, 2016 at 07:16:54PM -0500, Greg Hounsell via Public-List wrote:
> Is the plywood floor located about a foot from the rear of the bilge
> standard or something a previous owner put in?
> 
> If it's standard is it structural or just there to hold some bilge hose
> down?
> 
> The one in mine is mostly rotten and of course sitting under the liner's
> engine pan. I've sealed (at least I think I've got it sealed) the rest of
> the bilge to keep water out of the keel. But there is still some leakage
> down into the keel and the last place to try and fix is this floor and the
> bilge aft of it. Luckily the engine is out for a rebuild.
> 
> ...time to cut the liner out for access!
> Greg
> #592
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

-- 
Kris Coward	 http://unripe.melon.org/
GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


More information about the Public-List mailing list