[Public-List] What wood....

[wewe365 . via Public-List]

I am going to need toe rails also ,any help would be nice . thanks

On Wed, Mar 9, 2016 at 6:11 PM, Wes Gardner via Public-List <
public-list at lists.alberg30.org> wrote:

> Agreed, the profile of the toe rail on the older boats will just bend
> right around, no need for steam. I'm not familiar enough with the newer
> boats.
>
> Sent from my iPad
>
> > On Mar 9, 2016, at 6:48 PM, Michael Grosh via Public-List <
> public-list at lists.alberg30.org> wrote:
> >
> > FWIW I had the toe rail replaced on my preliner boat a few years ago and
> I
> > am pretty surethe yard did not have to steam bend it into position. The
> > bendis gradual enough to just pull it into position. One scarfed joint on
> > each side.
> > Michael Grosh
> > #220
> > They did a very nice job, the cost was within shouting distance of what
> the
> > whole boat cost in 1967. Fitting the taffrail piece was very labor
> > intensive, so they said.
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>