[Public-List] Cutless Bearing

Michael Grosh via Public-List public-list at lists.alberg30.org
Mon Mar 14 06:04:56 PDT 2016


I'm having a new cutless bearing pressed into the mount as we speak, 
Kastels in St. Michaels. Of course, it helps I live in St. Michaels.

Michael G
#220

On 3/14/2016 8:51 AM, John Boor via Public-List wrote:
> The set screws are to stop the cutlass bearing from moving, the cooling is
> done by the slots down the length of the bearing.  Any good chandlery
> should be able to either get one or direct you to a source.
>
> John
> passed owner #380
>
>> I’ve got #76 on the hard and have to replace the cutless bearing. Any
>> direction as to where a quality replacement can be found? Also, there
>> appears to be 2 set screws on either side of the bearing housing ( shaft
>> log? ), They appear to be filled with bottom paint. I’ve been told by an
>> experienced boat mechanic that these are supposed to be holes to allow
>> water into the bearing housing to cool it while under power. Can anyone
>> shed some light on this suggestion?
>> Thanks In Advance,
>> Bob
>>
>>
>> Sent from Mail for Windows 10
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org




More information about the Public-List mailing list