[Public-List] Prop Questions
James Allocco via Public-List
public-list at lists.alberg30.org
Wed Mar 16 09:53:51 PDT 2016
Hi all
I am very much interested in the 13-7 RH prop. Does anyone know the
condition, ie galvanic corrosion, type of bushing or if it is chipped?
Please let me know if anyone has that information and I will make
arrangements to purchase it and have it shipped.
Thanks
James Allocco
252 474 5804
On Wed, Mar 16, 2016 at 12:09 PM, Jonathan Bresler via Public-List <
public-list at lists.alberg30.org> wrote:
> Woody,
>
> That 13x7, which replaced your 12x6 two blade, is a two or three blade
> prop?
>
> Jonathan
>
> On Wednesday, March 16, 2016, Bill Woodford via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > Bob,
> >
> > I think you started this thread, but if I am mistaken forgive me.
> >
> > US 11 had a Graymarine engine when I bought her and I had a 12 x 6 two
> > blade RH prop on her that I loved. The graymarine and the prop pushed
> the
> > boat very well; 6 knots was no problem.
> >
> > I believe I still have the two blade 12 x 6 in my shed. If you want it,
> > you can have it. John was kind enough to give me his 13 x7 when I
> > repowered with a diesel and I am happy to "pay it forward" to another
> > Alberger.
> >
> > I can also attest that the 12 x 6 IS NOT compatible with my Yanmar 2gm
> > diesel. It will move the boat at approx. 2 knots and your fellow
> Albergers
> > will have a good laugh at your expense. ( I have a hat with a propeller
> on
> > it to prove it.)
> >
> >
> > Woody
> > US 11
> >
> > On Wed, Mar 16, 2016 at 10:21 AM, Rod via Public-List <
> > public-list at lists.alberg30.org <javascript:;>> wrote:
> >
> > > Mike :
> > > Thanks for both bits of info.
> > > 7 is way too shallow for my diesel but perhaps someone else would like
> to
> > > know - is that prop 2 blade or 3 ?
> > >
> > >
> > > Cheers, Rod
> > >
> > > <div>-------- Original message --------</div><div>From: via
> Public-List <
> > > public-list at lists.alberg30.org <javascript:;>>
> > </div><div>Date:16-03-2016 9:26 AM
> > > (GMT-05:00) </div><div>To: gdinwiddie at alberg30.org <javascript:;>,
> > > public-list at lists.alberg30.org <javascript:;> </div><div>Subject: Re:
> > [Public-List] Prop
> > > Questions </div><div>
> > > </div>
> > >
> > > Miller Island prpellors in Baltimore will re-pitch a prop 2"...so to
> > > clarify...a 13x7 can become a 13x9 for Mir pitch...or can become a 13x5
> > for
> > > less pitch. The other local prop shop is in St. Michael's called
> Kastel,
> > > I've heard excellent things about them.
> > >
> > >
> > > FWIW, I have a 13x7 RH 1" bore w/reduction bushing to 7/8" in the
> Alberg
> > > 30 flea market stuff. The owner wants $75 for it.
> > >
> > >
> > > Mike Lehman
> > >
> > > ~~/)~/)~~
> > >
> > >
> > >
> > >
> > >
> > >
> > > On Tue, Mar 15, 2016 at 6:58 PM -0700, "George Dinwiddie via
> > Public-List" <
> > > public-list at lists.alberg30.org <javascript:;>> wrote:
> > >
> > >
> > >
> > >
> > >
> > > Rod,
> > >
> > > I'll let someone else chime in on a prop shop. I don't have experience
> > > with any, but I know some on this list do.
> > >
> > > - George
> > >
> > > On 3/15/16 9:08 PM, Rod via Public-List wrote:
> > > > Bob: I am confident that the chip could be filled by brazing with
> > bronze
> > > filler rod and a bit of filing.
> > > >
> > > > George :
> > > > Do you know if a skilled prop shop is able to reduce the pitch on a
> > > bronze prop ?
> > > >
> > > >
> > > > Cheers, Rod
> > > >
> > > > <div>-------- Original message --------</div><div>From: Bob Bohmer
> via
> > > Public-List <public-list at lists.alberg30.org <javascript:;>>
> > </div><div>Date:15-03-2016
> > > 8:53 PM (GMT-05:00) </div><div>To: Alberg 30 Public List -- open to
> all
> > <
> > > public-list at lists.alberg30.org <javascript:;>>, George Dinwiddie <
> > gdinwiddie at alberg30.org <javascript:;>>
> > > </div><div>Subject: Re: [Public-List] Prop Questions </div><div>
> > > > </div>George,
> > > > I'm new to most of this as i started sailing a couple seasons
> ago.
> > > I've
> > > > gotten two opinions about the current prop. They were both very
> > > experienced
> > > > sailers / mechanics. They were of different opinions.Since i have it
> > out
> > > to
> > > > redo the bottom and the cutless bearing needs replacing, the prop
> needs
> > > to
> > > > come off. So i thought i would go new and keep the old one as an
> > > emergency
> > > > spare. It has a chip at one end and has spotty discoloration. I
> wasn't
> > > > aware that they could be rebuilt. #76 is kept in Gloucester, Va ( I
> > live
> > > in
> > > > Richmond ) and im still having trouble finding A-30 specific
> knowledge
> > > and
> > > > support locally.
> > > > On Mar 15, 2016 8:38 PM, "George Dinwiddie via Public-List" <
> > > > public-list at lists.alberg30.org <javascript:;>> wrote:
> > > >
> > > >> Bob,
> > > >>
> > > >> On 3/15/16 8:23 PM, via Public-List wrote:
> > > >>
> > > >>> I read somewhere on the list that the prop on an A30 with the Gray
> > > >>> Marine 4 cyl. was a 13 / 9 ( 2 blade ). This seems to be what I
> have
> > > >>> on #76. I am unable to confirm the 9 pitch, but assume it is that.
> > > >>> The name Michigan Wheel is mentioned on the maintenance pages as a
> > > >>> source for a new prop. They don’t have one ( 13 / 9 ) with a 7/8”
> > > >>> prop bore, but they sell a Nylon Bore Reducer with it. I also seem
> to
> > > >>> remember that it is a right hand prop. Can anyone confirm this? Is
> > > >>> there a cheaper source for a quality prop? There is a 5 – 6 week
> lead
> > > >>> time, so I’d like to get moving on the purchase asap.
> > > >>>
> > > >>
> > > >> Right-hand sounds right, but I've got an Atomic 4.
> > > >>
> > > >> Have you investigated getting your prop rebuilt?
> > > >>
> > > >> - George
> > > >>
> > > >> --
> > > >>
> > ----------------------------------------------------------------------
> > > >> When I remember bygone days George
> > Dinwiddie
> > > >> I think how evening follows morn; gdinwiddie at alberg30.org
> > <javascript:;>
> > > >> So many I loved were not yet dead,
> > http://www.Alberg30.org
> > > >> So many I love were not yet born. also
> > see:
> > > >> 'The Middle' by Ogden Nash
> > http://idiacomputing.com
> > > >>
> > ----------------------------------------------------------------------
> > > >>
> > > >>
> > > >>
> > > >> _______________________________________________
> > > >> These businesses support your Association:
> > > >> http://www.alberg30.org/store/A30supporters.html
> > > >> Please support them.
> > > >> _______________________________________________
> > > >> Public-List mailing list
> > > >> Public-List at lists.alberg30.org <javascript:;>
> > > >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > >>
> > > > _______________________________________________
> > > > These businesses support your Association:
> > > > http://www.alberg30.org/store/A30supporters.html
> > > > Please support them.
> > > > _______________________________________________
> > > > Public-List mailing list
> > > > Public-List at lists.alberg30.org <javascript:;>
> > > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > > _______________________________________________
> > > > These businesses support your Association:
> > > > http://www.alberg30.org/store/A30supporters.html
> > > > Please support them.
> > > > _______________________________________________
> > > > Public-List mailing list
> > > > Public-List at lists.alberg30.org <javascript:;>
> > > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > >
> > >
> > > --
> > >
> ----------------------------------------------------------------------
> > > When I remember bygone days George Dinwiddie
> > > I think how evening follows morn;
> gdinwiddie at alberg30.org
> > <javascript:;>
> > > So many I loved were not yet dead,
> http://www.Alberg30.org
> > > So many I love were not yet born. also see:
> > > 'The Middle' by Ogden Nash
> http://idiacomputing.com
> > >
> ----------------------------------------------------------------------
> > >
> > >
> > >
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org <javascript:;>
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org <javascript:;>
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org <javascript:;>
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org <javascript:;>
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> --
> Jonathan M Bresler
> Alberg 30 #262
> Annapolis/Eastport MD
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
More information about the Public-List
mailing list