[Public-List] Stephen Gwyn Water Tank follow-on question

Jonathan Bresler via Public-List public-list at lists.alberg30.org
Thu Nov 17 13:41:21 PST 2016


Joseph,

The two water tanks below the berths in the main saloon, at 22 gallons each
(?)
sound very interesting.  Did Moeller custom make the tanks to fit your boat
?
Looking at Moeller's website, I don't see tanks that would fit, at I don't
think of
of their tanks would fit.

If custom made, do you have the dimensions/order sheet that you sent them ?
Would have to measure my own boat to make sure tanks would fit, but your
order form would be/should be a good start.

Jonathan

On Thu, Nov 17, 2016 at 4:00 PM, Joseph Balderson via Public-List <
public-list at lists.alberg30.org> wrote:

>    I placed the water tanks beneath the berths in the main saloon. The two
> 22gal tanks are as low as possible in this configuration and amidships. The
> 12v pressure pump is aft of the port side tank and crossover line travels
> athwart ships in the engine compartment. Vents to the head and hanging
> locker. I skipped the deck fills and just lift the hinged bunk boards a
> fill through the inspection ports. Only one cruise and a number of day
> sails on the Chesapeake Bay so I don't know if this is sea trial enough to
> call it a good thing but I am optimistic. But there is no leakage. I
> ordered the tanks from Moeller. They have a great assortment which to
> choose. I took out the water tank forward and use the space for  storage of
> lighter items.
>
> On Nov 14, 2016 4:48 PM, "John Irving via Public-List" <
> public-list at lists.alberg30.org> wrote:
>
> > My 1979 A-39 has a water tank in the v berths with an aluminum top
> > fastened to angles attached to the hull.  I'd rather not have the
> aluminum
> > top, but my present mode has th boat at the mooring most hours in the
> week.
> > John Irving
> > Scotch Bonnet, #634
> >
> > > On Nov 14, 2016, at 4:36 PM, Wes Gardner via Public-List <
> > public-list at lists.alberg30.org> wrote:
> > >
> > > Mine's up in the V...obviously.  Don't know how the f/g top is actually
> > > fastened to the hull.  Maybe this is original???  If I were fabricating
> > > one, I'd just glass it into the hull a then install a large inspection
> > port
> > > like mine has.  Or, if you wanted the entire top to be removable,
> create
> > a
> > > lip (like a hull-to-deck joint) and fasten the top down to that.
> > >
> > > https://www.dropbox.com/s/akin9anucmr78sj/Fresh%20water%20ta
> > nk%20inspec.jpg?dl=0
> > >
> > > On Mon, Nov 14, 2016 at 4:14 PM, Jonathan Bresler via Public-List <
> > > public-list at lists.alberg30.org> wrote:
> > >
> > >> Folks,
> > >>
> > >> Regarding potable water.  Have been thinking about one or more
> integral
> > >> tanks.   Nigel Calder in his tome writes of installing an integral
> tank
> > in
> > >> the part of the bilge between the settees and that the wine glass
> shape
> > of
> > >> our hulls is ideal for this.   James Baldwin has installed an integral
> > tank
> > >> in the v-berth.  Neither describes how to seal the top of the tank to
> > the
> > >> body of the tank.  Both describe how they built the tank....install
> > pipe to
> > >> withdraw water, install passage to allow any water from the chain
> > locker to
> > >> run to the bilge, paint the bottom and side with epoxy, smooth it out
> > well,
> > >> install baffles (Calder uses solid fiberglass, Baldwin uses epoxy
> coated
> > >> plywood), paint the tank with BrewCoat or other FDA approved material,
> > >> attach the top, install fill and vents, install inspection ports.
> > >>
> > >> Thoughts ?
> > >>
> > >> How does not attach the top so that it will be water tight and
> smoothly
> > >> connected so that one can clean the inside of the tank throughly ?
> > >>
> > >> Jonathan
> > >>
> > >> On Fri, Nov 11, 2016 at 9:09 AM, Michael Grosh via Public-List <
> > >> public-list at lists.alberg30.org> wrote:
> > >>
> > >>> Potable is a moving target. I don't like eating food cooked in
> aluminum
> > >>> cookware, but by most standards it's still edible. Aluminum oxide is
> > the
> > >>> sand and it is pretty stable chemically. Aluminum has been linked to
> > >>> Alzheimers,  but that finding has been challenged.
> > >>> MichaelGrosh
> > >>> #220
> > >>>
> > >>> On Nov 11, 2016 6:53 AM, "Bill McCoy via Public-List" <
> > >>> public-list at lists.alberg30.org> wrote:
> > >>>
> > >>>> About a year ago you posted your fabulous work for the water tank on
> > >> the
> > >>>> site. One question regarding the tank in general:  Have you any
> > >>> information
> > >>>> for those of us who may wish to clean our Aluminum tanks, vis-a-vis
> > >>>> products to use which are effective in eliminating the "sand" of the
> > >>>> insides etc.?
> > >>>>
> > >>>>
> > >>>> I've investigated mine and took photos to see that despite this
> "sand"
> > >>>> which I'm told is due to deterioration, it does not leak and is
> quite
> > >>>> serviceable for a washing water tho not potable.
> > >>>>
> > >>>>
> > >>>> Skeep
> > >>>> _______________________________________________
> > >>>> These businesses support your Association:
> > >>>> http://www.alberg30.org/store/A30supporters.html
> > >>>> Please support them.
> > >>>> _______________________________________________
> > >>>> Public-List mailing list
> > >>>> Public-List at lists.alberg30.org
> > >>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >>>>
> > >>> _______________________________________________
> > >>> These businesses support your Association:
> > >>> http://www.alberg30.org/store/A30supporters.html
> > >>> Please support them.
> > >>> _______________________________________________
> > >>> Public-List mailing list
> > >>> Public-List at lists.alberg30.org
> > >>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >>>
> > >>
> > >>
> > >>
> > >> --
> > >> Jonathan M Bresler
> > >> S/V Constance Alberg 30 #262
> > >> Annapolis/Eastport MD
> > >> _______________________________________________
> > >> These businesses support your Association:
> > >> http://www.alberg30.org/store/A30supporters.html
> > >> Please support them.
> > >> _______________________________________________
> > >> Public-List mailing list
> > >> Public-List at lists.alberg30.org
> > >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >>
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



-- 
Jonathan M Bresler
S/V Constance Alberg 30 #262
Annapolis/Eastport MD


More information about the Public-List mailing list