[Public-List] Cockpit Vertical Surfaces Refresh

[Mike Lehman via Public-List]

Jonathan

For epoxy filler, I have found "System3 Quick Fair" to be the best and
easiest to work with.

On Sun, Apr 16, 2017 at 1:10 PM, Jonathan Bresler via Public-List <
public-list at lists.alberg30.org> wrote:

> Folks,
>
> Thanks to all who explained how they seal the chainplate openings at the
> deck. Not having installed chainplate covers yet, there's not the option of
> using such covers to contain and maintain pressure on butyl tape, at this
> time.  So ended up using 3M white sealant.  Good news is that the sealant
> was applied a week ago,  washed the decks heavily today.  No indication of
> any moisture inside.  Thank goodness!
>
> Next question:  the outside surfaces of the aft end of the cabin and the
> vertical sides of the cockpit foot well are looking more than a little
> tired.  In addition, there are pockmarks in the port side bulkhead
> surface....not deep, just unsightly.  How should these surfaces be
> refreshed?  Sand lightly, clean with TSP, and paint?  Never done any
> gelcoat work; don't know anything about how it done.
>
> Happy Easter,
> Jonathan....who will be incommunicado till Wednesday morning when the boat
> splashes.
> --
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



-- 
Mike Lehman
~~~_/)_/)~~_/)~~~