[Public-List] Teak Grab rails

[Gordon Laco via Public-List]

Good morning Greg,

Most marine stores sell pre-made teak rails (shelves, racks etc too) but you’ll be very lucky to find pre made ones that fit the spacing of the existing bolt holes.  

On the other hand, they’re dead easy to cut out of plank, and only require basic shaping with a sander and plane… no particular woodworking skills required.  Have you got an old one to use as a pattern?

Gord
#426 Surprise
(just packing the boat up for a ten day cruise up our coast and back…)

On 2017-08-12, 9:40 AM, "Public-List on behalf of Greg Dawson via Public-List" <public-list-bounces at lists.alberg30.org on behalf of public-list at lists.alberg30.org> wrote:

    
    Hi there
     
    Does anyone know where I can get teak grab rails that will fit the A30? 
     
    Thanks 
     
    Greg #348
    _______________________________________________
    These businesses support your Association:
    http://www.alberg30.org/store/A30supporters.html
    Please support them.
    _______________________________________________
    Public-List mailing list
    Public-List at lists.alberg30.org
    http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org