[Public-List] Hull to Deck Joint

[Jason S]

If you look on my page, www.svsalacia.blogspot.com, I have a few photos
there. My later hull #457 does in fact have a reddish sealant plus the mat.
Unfortunately where they didn't place any sealant, port bow,  the rivets
failed and the joint opened up.
I'd use 5200 to seal and rebond that joint. I was planning on
refiberglassing the entire joint after refastening with #12 nuts and bolts.

Hope this helps

On Dec 19, 2017 9:56 PM, "Greg Roberts via Public-List" <
public-list at lists.alberg30.org> wrote:

>
>
> Does anyone have photos of the joint and ideally the process of replacing
> the sealant? I'm assuming I'll need to drop the stick? I ask because it's
> not something we do often in San Diego.
> Greg
> Ayla
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>