[Public-List] Teak inlay in cockpit seats and hatch cover

Stephen Gwyn via Public-List public-list at lists.alberg30.org
Wed Feb 1 14:00:19 PST 2017


My boat (Hull #495) has teak plywood inset into fibreglass for both
the cockpit seats / locker lids and the sliding hatch. After only 45 years,
the teak is starting to rot. The depression in the cockpit seats
is 3/4" deep. The depression on the sliding hatch cover is 3/8" deep.
This piece of teak has fore-and-aft cuts on the bottom side so
the plywood can bend to meet the curve.

I'd like to switch to teak battens, with black sealant in between.

Has anybody done this?


More information about the Public-List mailing list