[Public-List] Handles by the Companionway
George Dinwiddie via Public-List
public-list at lists.alberg30.org
Fri Feb 24 04:49:50 PST 2017
Jonathan,
I've got teak strips on the cockpit side, either side of the
companionway. You could use something similar to hide the bolt heads, if
you wanted.
- George
On 2/22/17 11:21 AM, Jonathan Bresler via Public-List wrote:
> Folks,
>
> Have decided the add a handle on each side of the companionway, so that one
> has a secure handhold when climbing out of the cabin. Easier access has
> been a request of my wife, so there is some priority here ;) Bought the two
> single loop teak handles at Fawcett's President's Day Sale. Good prices
> there at this time: 35% many items.
>
> The bulkhead at the forward end of the companionway is about 7/16" thick
> and appears to be gelcoat/fiberglass on both sides over masonite(?). The
> folks at Fawcett's recommended drilling a 1/4" hole through the handle and
> securing it with a 1/4" shoulder bolt and washers. On the outside the head
> of the bolt and washer would be visible (not a concern for me). On the
> inside the nut and washer would be recessed inside a 5/8" hole drilled in
> the handle and finished with a teak plug.
>
> Thought that bronze 1/4" lag screws passing from outside into the handle
> might look nice. Bronze washers outside of course. The bronze might be
> more appealing that the stainless.
>
> Photos of some boats appear to place the handles close to the overhead,
> which makes some sense. As one climbs out, the handles are relatively
> lower compared to the body, so starting high might be better. Not so good
> ending up with handles that one has to crouch down a bit to reach, I would
> venture to say.
>
> How would you secure these handles ?
>
> Jonathan
>
--
----------------------------------------------------------------------
When I remember bygone days George Dinwiddie
I think how evening follows morn; gdinwiddie at alberg30.org
So many I loved were not yet dead, http://www.Alberg30.org
So many I love were not yet born. also see:
'The Middle' by Ogden Nash http://idiacomputing.com
----------------------------------------------------------------------
More information about the Public-List
mailing list