[Public-List] propeller size

[Gordon Laco via Public-List]

Rolodex?   Damned spell correct... 

On 2017-07-20, at 1:42 PM, Gordon Laco via Public-List <public-list at lists.alberg30.org> wrote:

> Hello gang,
> 
> Rolodex, I assume that's 12" pitch?   Ours is similar. (A4 with 1:1 trany)
> 
> I'd suggest 8 or 9 is small unless the pitch is heavy, or perhaps there are three or four blades... 
> 
> What sort of engine and transmission have you got?
> 
> Gord #426
> 
> On 2017-07-20, at 1:25 PM, Rolph and Joan Townshend via Public-List <public-list at lists.alberg30.org> wrote:
> 
>> I found a 7X12 did the best job for me
>> Rolph
>> 
>> On Thu, Jul 20, 2017 at 1:16 PM, Mark Dietrich via Public-List <
>> public-list at lists.alberg30.org> wrote:
>> 
>>> Had my boat hauled yesterday and was surprised at how small the propeller
>>> was, about 8 or 9 inches in diameter.
>>> What are others using and finding most effective/
>>> Thanks
>>> Alberg #531 Richmond CA
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org