[Public-List] Main sail track on mast

Gordon Laco via Public-List public-list at lists.alberg30.org
Thu Jul 27 21:52:38 PDT 2017


Hello Tim –

A much better solution would be to replace the rivets with new ones.  They are quicker to install, much stronger than self tapping screws (which really shouldn’t be used in a mast), and tidier.

I have not encountered this issue before…  you might investigate to find out why it’s happened, in addition to the repair.

Gord Surprise 426

On 2017-07-28, 12:23 AM, "Public-List on behalf of Tim Peek via Public-List" <public-list-bounces at lists.alberg30.org on behalf of public-list at lists.alberg30.org> wrote:

    Today, while out with some friends I noticed the my the upper slider thing (feel free to correct me with the name!) on the main was off of the track. Thinking nothing of it I took all of them off and put them back on. Hoisted the sail up and much to my disappointment found the problem as the upper part of the main began sliding off the track about three feet past the spreaders!
    
    I called someone, and as I had suspected the joint in the track has broken and I cannot hoist the main above that spot. I was able to get by with putting in two reefs and I really love the versatility of sailboats!
    
    My plan is to get up there, drill out three above and below rivets on the track, and put in some self tapping screws larger than the original rivets. I imagine I am not the first to do this, or think of it. Can anyone offer me some recommendations, issues with this or preferred alternatives? Thank you.
    
    Tim
    Nevermore 219
    _______________________________________________
    These businesses support your Association:
    http://www.alberg30.org/store/A30supporters.html
    Please support them.
    _______________________________________________
    Public-List mailing list
    Public-List at lists.alberg30.org
    http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
    





More information about the Public-List mailing list