[Public-List] propeller size

Mike Lehman via Public-List public-list at lists.alberg30.org
Thu Jul 20 10:38:52 PDT 2017


Mark, the standard prop from Whitby was 13x7 with 7/8" shaft 2-blade with
an Atomic 4 engine. If the engine has been changed, the prop would also be
changed. Also, if you have a 3-blade prop you could us a smaller diameter,
higher pitch prop. The is also a 3-blade smaller diameter prop that was
specifically designed to the Atomic 4 and several people switched to that
prop. The distinguishing feature of that prop is the tips are bent in
slightly, like the singlets on a 737 aircraft. Send me a picture of your
prop and let us know what engine you have. The lost does not accept
pictures so reply to me with it.

On Jul 20, 2017 1:16 PM, "Mark Dietrich via Public-List" <
public-list at lists.alberg30.org> wrote:

Had my boat hauled yesterday and was surprised at how small the propeller
was, about 8 or 9 inches in diameter.
What are others using and finding most effective/
Thanks
Alberg #531 Richmond CA
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



More information about the Public-List mailing list