[Public-List] Edson Tiller head

[Gordon Laco via Public-List]

I'm sorry to read your report.  

Have a look at Tern Boatworks' website.  They've got the capability to cast very good bronze fittings.  

Gord 426 Surprise 

On 2017-03-01, at 11:49 PM, Stephen Gwyn via Public-List <public-list at lists.alberg30.org> wrote:

> I just bought a tiller head from Edson, as listed on
> http://www.alberg30.org/maintenance/Steering/TillerHead.html
> 
> It is very poorly made. It has almost as much side-to-side play as the 40+
> year old
> one it is supposed to be replacing. The part that goes on the tiller post
> is not square
> to the part that attaches to the tiller. The holes that one might use to
> through bolt
> it to the tiller don't line with each other.
> 
> I am going to try to return it. If that fails I've just bought a 400$ paper
> weight.
> 
> Does anybody know of another source for tiller heads?
> 
> Stephen
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org