[Public-List] Tiller Bronze bracket wobble

[picomar1957 via Public-List]

You could try machine the head to shift hole oversize then add a bronze shim and then drill a hole to though bolt the head and shift I did this and have no play on tiller now not near boat or I would send a pic
SV Cassandra1966 Alberg 30#182


Sent from my T-Mobile 4G LTE Device-------- Original message --------From: Bill McCoy via Public-List <public-list at lists.alberg30.org> Date: 3/11/2017  7:43 AM  (GMT-05:00) To: public-list at lists.alberg30.org Subject: [Public-List] Tiller Bronze bracket wobble 
For you Alberg Savants:


Although my 1977 tiller bracket arm is sturdy and screws through tiller base are well put, the wobble at the connection (plated bronze parts) has seen many a hand pulling and pushing and overall provides about 4 to 5 inches of dead play at end of tiller.


Has anyone found a suitable replacement for this tiller to rudder replacement part which does not include wobble/wiggle and makes for direct action when underway?


Skeep
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org