[Public-List] Spinnaker Halyard length and size.

[George Dinwiddie]

Jonathan,

I used to be on the A30 site, but persistent attacks made me disable the 
"collaborate" section. See 
http://web.archive.org/web/20101212054448/http://alberg30.org/collaborate/RunningRigging 
for an archive of the page.

  - George

On 10/20/17 3:11 PM, Jonathan Bresler via Public-List wrote:
> Folks,
> 
> Hope everyone is doing well and getting out on the water to enjoy the
> wonderful Indian Summer weather we are having in the Chesapeake region.
> Gordon, our Misery Cruises are scheduled for later in the year ;)
> 
> The cover, outer sheath, of Constance's spinnaker halyard has chafed,
> chafed too much due rubbing against the spreader after I secured it in a
> poor position.  Time to replace that line.  Removed it from the boat the
> other day.  Ends up that is 99 feet long.  Looked on the Alberg30.org
> website but did not find running rigging lengths.   Before I order a new
> halyard with snap shackle, ball, and reeving eye, would like to find out
> the length and diameter of line that folks are using for their spinnakers.
> Please indicate if the halyard is led to the cockpit or handled at the mast.
> 
> Thank you,
> Jonathan
> 
> P.S. Anyone deal with dynamicsailor.com?  They seem to have good pricing.
> 

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------