[Public-List] Hurth transmission--hot or cold for changing/checking oil?

Randy Katz via Public-List public-list at lists.alberg30.org
Wed Sep 13 15:12:14 PDT 2017


Thanks, Mike, I'll try that, while making every effort not to drop it in
there!   😨
Makes sense.



On Wed, Sep 13, 2017 at 4:42 AM Mike Lehman <mlehman at gmail.com> wrote:

> Randy,
> I have a universal M4-30 in my Alberg 30 and have the same issue reading
> the dip stick for the transmission. To solve this, I use a small diameter
> wooden dowel to measure the level. The transmission oil shows up well on
> the wood.
>
>
>>
>>
>> public-list at lists.alberg30.org> wrote:
>>
>>
>>
>>
>>
>> > Send Public-List mailing list submissions to
>>
>>
>> >         public-list at lists.alberg30.org
>>
>>
>> >
>>
>>
>> > To subscribe or unsubscribe via the World Wide Web, visit
>>
>>
>> >         http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>>
>> > or, via email, send a message with subject or body 'help' to
>>
>>
>> >         public-list-request at lists.alberg30.org
>>
>>
>> >
>>
>>
>> > You can reach the person managing the list at
>>
>>
>> >         public-list-owner at lists.alberg30.org
>>
>>
>> >
>>
>>
>> > When replying, please edit your Subject line so it is more specific
>>
>>
>> > than "Re: Contents of Public-List digest..."
>>
>>
>> >
>>
>>
>> >
>>
>>
>> > Please do NOT include the entire digest in your reply!
>>
>>
>> > ======================================================
>>
>>
>> >
>>
>>
>> > Greetings, All,
>>
>>
>>
>>
>>
>> Here's an easy question--When checking or changing transmission oil (Hurth
>>
>>
>> trans. on my M3-20B Universal) is it best to have the thing hot or cold?
>>
>>
>>
>>
>>
>> The operator's manual and service manual--neither one specifies, which
>>
>>
>> seems odd.
>>
>>
>>
>>
>>
>> For this business an oil pump is really required as only about a cup of
>> the
>>
>>
>> .75 quart capacity drains out by gravity via the under plug due to the
>> tilt
>>
>>
>> of the engine.
>>
>>
>>
>>
>>
>> Also, I find reading the oil level on the dipstick (round not flat)
>>
>>
>> incredibly difficult. The reddish ATF-Dextron-II-compatible goo just
>>
>>
>> doesn't show up. I tried lightly sanding the end of the dipstick thinking
>>
>>
>> that might help the oil to "stick" more visibly--barely helps. Why the
>> heck
>>
>>
>> don't they have a dipstick you can read easily?  Arg.
>>
>>
>>
>>
>>
>> Also, given the small amount of oil the transmission requires, how precise
>>
>>
>> does one need to worry about being? Plus, since engine and tranny are
>>
>>
>> tilted, how accurately set are the dipstick marks? I'm thinking probably
>>
>>
>> not very, but I sure don't want to contribute to any problems, so I do the
>>
>>
>> best I can.
>>
>>
>>
>>
>>
>> Thank You,
>>
>>
>> Best Regards,
>>
>>
>>
>>
>>
>> Randy
>>
>>
>>
>>
>>
>> --
>>
>>
>>
>>
>>
>> Randy Katz
>>
>>
>> Simple Gifts #249
>>
>>
>>
>> 從我的
>>
>
>>
>> _______________________________________________
>>
>>
>> These businesses support your Association:
>>
>>
>> http://www.alberg30.org/store/A30supporters.html
>>
>>
>> Please support them.
>>
>>
>> _______________________________________________
>>
>>
>> Public-List mailing list
>>
>>
>> Public-List at lists.alberg30.org
>>
>>
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>>
>>
>
>


More information about the Public-List mailing list