[Public-List] Roller Furling

Jeffrey via Public-List public-list at lists.alberg30.org
Thu Sep 28 11:04:58 PDT 2017


Gord,

Did you write that reffing a furling headsail via rolling some of it in is
bad for the sail? I'd not heard this before.  What's the issue?

Jeff

On Thu, Sep 28, 2017 at 11:54 AM, Gordon Laco via Public-List <
public-list at lists.alberg30.org> wrote:

> That’s the way I did it aboard the Folkboat...
>
> G
> #426 Surprise
>
> On 2017-09-28, 11:35 AM, "Public-List on behalf of George Dinwiddie via
> Public-List" <public-list-bounces at lists.alberg30.org on behalf of
> public-list at lists.alberg30.org> wrote:
>
>     I quickly learned not to tie the downhaul to the halyard or the head of
>     the sail. Pulling down on the head of the sail twists the sail at the
>     top hank, jamming it on the forestay. That's why I tie the downhaul to
>     the top hank. A clove hitch around the body of the hank secured with a
>     half hitch seems to work fine.
>
>       - George
>
>     On 9/27/17 10:08 PM, Rod Symmes via Public-List wrote:
>     >   <<< Guess that I could install grommets along the
>     > luff, say three inches in from the luff tape and run a line from the
> top
>     > grommet to the foredeck, then use a downhaul just as George does.
>  Have
>     > not seen anyone do that.  Could be interesting.  Will have to ask
> around
>     > about it. >>>
>     > Jonathan -  I would advise against doing that.  I don't believe it
> will work well - and here is why.
>     >
>     > On my previous boat I had hanked on foresails and a down-haul that
> worked beautifully until I too thought I could "improve" it.  My halliard
> had a snap for the head of the jib and the down haul was also tied to the
> snap, down to a block at the stem and back to the cockpit, as someone
> mentioned earlier.  Because that down haul was not restrained, if the wind
> was just right, it would whap whap whap at the back of the jib.  I thought
> I would fix that by clipping each ( ?? senior moment) on the luff of the
> jib over both the fore stay and the down haul as I installed it thus
> containing the down haul line.  My thinking was that should work - it will
> be coming down with the sail.
>     >
>     > WRONG  !   By the time the jib was half way down, the ( senior
> moments ) were piling up at the foot of the stay and the down haul was
> having to slide through them all.  The friction became so great I could not
> get the jib all the way down.  Grommets would bind on the line even worse.
> Also,  you would have to re-thread that line each time you change jibs.
> Not convenient or quick.
>     >
>     > With the down haul loose to fly from the head to the stem block, it
> was quick and easy and, while lowering sail, if pulled down snugly and
> cleated, even a big genoa would usually stay inside the lifelines until I
> could deal with it.
>     >
>     > Bonus Feature:  the halliard can never get lost up the mast.
>     >
>     >
>     > Happy sailing.
>     >
>     >
>     > Cheers,     Rod            P.S.   Is that  (senior moment) called a
> barrel snap ?????   (-:
>     >
>     > ~~~~_/) ~~~~~~~~~~
>     > ~~~~~~~_/) _/) ~~~~~~~
>     > ~~_/) ~~~~~~~~~~~~
>     >
>     >
>     > _______________________________________________
>     > These businesses support your Association:
>     > http://www.alberg30.org/store/A30supporters.html
>     > Please support them.
>     > _______________________________________________
>     > Public-List mailing list
>     > Public-List at lists.alberg30.org
>     > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>     >
>
>     --
>       ------------------------------------------------------------
> ----------
>        When I remember bygone days                         George Dinwiddie
>        I think how evening follows morn;
> gdinwiddie at alberg30.org
>        So many I loved were not yet dead,
> http://www.Alberg30.org
>        So many I love were not yet born.                          also see:
>                     'The Middle' by Ogden Nash
> http://idiacomputing.com
>       ------------------------------------------------------------
> ----------
>
>
>
>     _______________________________________________
>     These businesses support your Association:
>     http://www.alberg30.org/store/A30supporters.html
>     Please support them.
>     _______________________________________________
>     Public-List mailing list
>     Public-List at lists.alberg30.org
>     http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



-- 

______________

Jeffrey Fongemie

<http://instagram.com/jfongemie>



More information about the Public-List mailing list