[Public-List] Another winch question
Carla
hazlegrove at aol.com
Sat Dec 29 06:45:41 PST 2018
I am also in need of a pawl spring for one of my cockpit spinnaker winches. They’re original equipment from #433 which was built in 1970. The link that was posted earlier to Hutton-Arco
indicates that the springs are compatible for almost all Barlow/ Barient winches. This would appear to be what I also need. Any thoughts or suggestions would be appreciated
Richard Hazlegrove
Quest 433
Mobjack Bay, VA
> On Dec 28, 2018, at 4:04 PM, public-list-request at lists.alberg30.org wrote:
>
> Send Public-List mailing list submissions to
> public-list at lists.alberg30.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> or, via email, send a message with subject or body 'help' to
> public-list-request at lists.alberg30.org
>
> You can reach the person managing the list at
> public-list-owner at lists.alberg30.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Public-List digest..."
>
>
> Please do NOT include the entire digest in your reply!
> ======================================================
>
>
>
> Today's Topics:
>
> 1. Rudder blade paintings and coatings (James Cowhey)
> 2. Barlow winch parts (Paul Wilson)
> 3. Re: Barlow winch parts (Gordon Laco)
> 4. Re: Barlow winch parts (Gordon Laco)
> 5. Lighthouses of the Chesapeake Bay (P Seidel)
> 6. Re: Barlow winch parts (Michael Connolly)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 27 Dec 2018 17:01:34 -0500
> From: James Cowhey <jrc127 at ptd.net>
> To: Alberg 30 Public List -- open to all
> <public-list at lists.alberg30.org>
> Subject: [Public-List] Rudder blade paintings and coatings
> Message-ID: <ACF19BA6-3568-4946-AE98-BD6C2ADC1D5A at ptd.net>
> Content-Type: text/plain; charset=utf-8
>
> All,
>
> Mo Cuisle (#56) is in need of some rudder repair. The hardware was replaced by a PO and looks to be in good shape. However, there is a thick coating of coarse FG cloth and resin on the blade that is cracked and peeling. The rudder seems to be undamaged. I?m in the process of scraping and sanding the old coating/finish, but I need advice as to how the rudder should be refinished. Should I put up a layer of FB cloth and epoxy, coat with barrier paint, and then anti fouling? Is the FB and resin necessary?
>
> Any advice appreciated.
>
>
> Happy Holidays.
>
> James Cowhey
> S/V Mo Cuisle
> North East, MD
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 27 Dec 2018 19:45:32 -0500
> From: Paul Wilson <dcmcrider at gmail.com>
> To: Alberg 30 Public List -- open to all
> <public-list at lists.alberg30.org>
> Subject: [Public-List] Barlow winch parts
> Message-ID:
> <CAFfy=y2x=C4sE=BMR43sU2boaQQqRAVykCnZF=ez+rq2+yAq3Q at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> I have Barlow 24s mounted on the cockpit coamings. I took them off
> today--along with all the teak for stripping and varnishing. Anyway, I'm
> giving the winches a thorough servicing and noticed one of the winches has
> a broken pawl spring.
>
> I've read on-line that Lewmar pawls and springs are compatible. Can anyone
> confirm? Hutton-Arco will sell you a Barlow NOS set of 4 pawls and 8
> springs for $38 (Australian) plus an unknown amount for shipping from Oz.
> http://www.arco-winches.com/products/spares
>
> I may just do that--I'm in no hurry. On the hard until March (at least.)
>
> Paul / Slainte #129
>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 27 Dec 2018 20:07:23 -0500
> From: Gordon Laco <mainstay at csolve.net>
> To: Alberg 30 Public List -- open to all
> <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Barlow winch parts
> Message-ID: <3DCA1E09-E695-496F-9CE7-66031606C745 at csolve.net>
> Content-Type: text/plain; charset=utf-8
>
> Hello Paul,
>
> You?d be best advised to use the correct fittings? shipping from Australia isn?t expensive, just slow (unless you?re in a rush and don?t mind the cost of fast delivery) We occasionally bring Hutton winches in when we have orders for them.
>
>
> Gordon Laco
> www.gordonlaco.com
> #426 Surprise
>
>> On Dec 27, 2018, at 7:45 PM, Paul Wilson via Public-List <public-list at lists.alberg30.org> wrote:
>>
>> I have Barlow 24s mounted on the cockpit coamings. I took them off
>> today--along with all the teak for stripping and varnishing. Anyway, I'm
>> giving the winches a thorough servicing and noticed one of the winches has
>> a broken pawl spring.
>>
>> I've read on-line that Lewmar pawls and springs are compatible. Can anyone
>> confirm? Hutton-Arco will sell you a Barlow NOS set of 4 pawls and 8
>> springs for $38 (Australian) plus an unknown amount for shipping from Oz.
>> http://www.arco-winches.com/products/spares
>>
>> I may just do that--I'm in no hurry. On the hard until March (at least.)
>>
>> Paul / Slainte #129
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 27 Dec 2018 20:09:10 -0500
> From: Gordon Laco <mainstay at csolve.net>
> To: Alberg 30 Public List -- open to all
> <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Barlow winch parts
> Message-ID: <57FF8C74-6C58-4868-9D07-50F0D1DC64F0 at csolve.net>
> Content-Type: text/plain; charset=us-ascii
>
> Hello again - I should have added that the folks at Hutton will likely just send you some directly without your having to go through a distributor like ourselves.
>
> Gordon Laco
> www.gordonlaco.com
> #426 Surprise
>
>
>
>> On Dec 27, 2018, at 7:45 PM, Paul Wilson via Public-List <public-list at lists.alberg30.org> wrote:
>>
>> I have Barlow 24s mounted on the cockpit coamings. I took them off
>> today--along with all the teak for stripping and varnishing. Anyway, I'm
>> giving the winches a thorough servicing and noticed one of the winches has
>> a broken pawl spring.
>>
>> I've read on-line that Lewmar pawls and springs are compatible. Can anyone
>> confirm? Hutton-Arco will sell you a Barlow NOS set of 4 pawls and 8
>> springs for $38 (Australian) plus an unknown amount for shipping from Oz.
>> http://www.arco-winches.com/products/spares
>>
>> I may just do that--I'm in no hurry. On the hard until March (at least.)
>>
>> Paul / Slainte #129
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 28 Dec 2018 13:48:20 +0000 (UTC)
> From: P Seidel <pat.seidel at yahoo.com>
> To: Alberg-30 List <public-list at alberg30.org>
> Subject: [Public-List] Lighthouses of the Chesapeake Bay
> Message-ID: <36385632.11127625.1546004900451 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> Alberg 30ers;
> There will be a presentation on the five types of lighthouses found on the Chesapeake Bay on January 5th at Sandy Point State?Park. I believe that the speaker is a fellow PSA Member, Bob Stevenson. The Park personnel are asking for RSVP, and you can get more information at?
> http://www.whatsupmag.com/events/155682/lighthouses-of-the-chesapeake-bay
> and
> https://www.facebook.com/events/801111440237969/
>
> Happy 2019!
> Pat Seidel
>
> ------------------------------
>
> Message: 6
> Date: Fri, 28 Dec 2018 09:13:49 -0500 (EST)
> From: Michael Connolly <crufone at comcast.net>
> To: Alberg 30 Public List -- open to all
> <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Barlow winch parts
> Message-ID: <1924488911.385221.1546006429824 at connect.xfinity.com>
> Content-Type: text/plain; charset=UTF-8
>
> Paul,
> Check to see what the spring looks like. I once made a replacement spring out of a cut off Bobbie Pin. This was for a small winch on a Typhoon. That was 4 years ago and the owner has not had any problems. Check to be sure you use the correct lubricant.
> Michael
>> On December 27, 2018 at 7:45 PM Paul Wilson via Public-List <public-list at lists.alberg30.org> wrote:
>>
>>
>> I have Barlow 24s mounted on the cockpit coamings. I took them off
>> today--along with all the teak for stripping and varnishing. Anyway, I'm
>> giving the winches a thorough servicing and noticed one of the winches has
>> a broken pawl spring.
>>
>> I've read on-line that Lewmar pawls and springs are compatible. Can anyone
>> confirm? Hutton-Arco will sell you a Barlow NOS set of 4 pawls and 8
>> springs for $38 (Australian) plus an unknown amount for shipping from Oz.
>> http://www.arco-winches.com/products/spares
>>
>> I may just do that--I'm in no hurry. On the hard until March (at least.)
>>
>> Paul / Slainte #129
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> End of Public-List Digest, Vol 3775, Issue 1
> ********************************************
More information about the Public-List
mailing list