[Public-List] Preserving engines

[Michael Michael]

What is the fluid they use?

Sent from Yahoo Mail on Android 
 
  On Tue, Dec 11, 2018 at 7:31 AM, gewhite via Public-List<public-list at lists.alberg30.org> wrote:   For what it is worth, the Smithsonian's procedure for
preserving water-cooled engines, taken, I think, from USAF
procedures, is to keep the system filled with an
anti-corrosive fluid, as the residue of other fluids left
in an engine does promote  corrosion. - Gordon White,
Brigadoon II









> > > > 
> > > >            Gordon Laco
> > > >            #426 Surprise
> > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > >                > > > > On Dec 3, 2018, at 7:49 AM,
> Michael via Public-List < public-list at lists.alberg30.org
> mailto:public-list at lists.alberg30.org > wrote:
> > > > > 
> > > > >                You have way more extreme weather
> than I Mid Chesapeake Bay, and your routine seems to
> mostly work well for you. I wonder, though, if draining
> the water jacket (and not having a rust inhibiting anti
> freeze) accelerates internal corrosion.
> > > > >                Checkmate's original A4
> died...poorly. Head stud bolts pulling out of badly
> rusted block (several times, it's amazing how oversized
> the studs can be and still work on the A4), warped head,
> etc. The engine was badly abused in her long life of
> being brackish water cooled.
> > > > > 
> > > > >                Michael Grosh
> > > > >                #220
> > > > > 
> > > > > 
> > > > >
>
                _______________________________________________
> > > > >                These businesses support your
> Association:
> > > > >
>
                http://www.alberg30.org/store/A30supporters.html
> > > > >                Please support them.
> > > > >
>
                _______________________________________________
> > > > >                Public-List mailing list
> > > > >                Public-List at lists.alberg30.org
> > > > >
>
                http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > > > 
> > > > >            > > >
>
            _______________________________________________
> > > >            These businesses support your
> Association:
> > > >
>
            http://www.alberg30.org/store/A30supporters.html
> > > >            Please support them.
> > > >
>
            _______________________________________________
> > > >            Public-List mailing list
> > > >            Public-List at lists.alberg30.org
> > > >
>
            http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > > 
> > > >        > > 
> > >    > 
> > 
>  
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Mon, 3 Dec 2018 17:13:46 +0000
> From: Rod Symmes <weatherhelm at hotmail.com>
> To: Alberg <public-list at lists.alberg30.org>, public-list
>     <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Drain plugs
> Message-ID:
>
    <BLUPR19MB0340FB0BA31C7B7B96A62CE1BBAE0 at BLUPR19MB0340.namprd19.prod.outlook.com>
>     
> Content-Type: text/plain; charset="utf-8"
> 
> Gord:
> A plumbing lesson that might give you further food for
> thought.
> For years I winterized a couple of water pumps at the
> cottage by pulling the drain plugs. One spring the
> threads were so rusted that I too had to run a tap in
> order to install the plugs.  That is when I realized that
> a lot of the rust occurred because of exposure to air.
> (even more of a problem with cast iron plugs)  My new
> routine is to pull the plug and while it drains, rap
> fresh Teflon tape on the plug, then re-install.  I always
> have clean threads and no searching for the "safe" place
> I put them.
> 
> Rod
> 
> ------------------------------
> 
> Message: 4
> Date: Mon, 3 Dec 2018 12:16:16 -0500
> From: Gordon Laco <mainstay at csolve.net>
> To: Alberg 30 Public List -- open to all
>     <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Drain plugs
> Message-ID:
> <E64C7544-467E-44B1-B010-5F584B97C95F at csolve.net>
> Content-Type: text/plain;    charset=utf-8
> 
> That?s pretty much what I do? teflon tape AND the same
> grease we use on Voyager fasteners.  
> 
> Gordon Laco
> #426 Surprise
> 
> 
> 
> 
> > On Dec 3, 2018, at 12:13 PM, Rod Symmes via Public-List
> <public-list at lists.alberg30.org> wrote:
> > 
> > Gord:
> > A plumbing lesson that might give you further food for
> thought.
> > For years I winterized a couple of water pumps at the
> cottage by pulling the drain plugs. One spring the
> threads were so rusted that I too had to run a tap in
> order to install the plugs.  That is when I realized that
> a lot of the rust occurred because of exposure to air.
> (even more of a problem with cast iron plugs)  My new
> routine is to pull the plug and while it drains, rap
> fresh Teflon tape on the plug, then re-install.  I always
> have clean threads and no searching for the "safe" place
> I put them.
> > 
> > Rod
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> >
>
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
> 
> 
> ------------------------------
> 
> Subject: Digest Footer
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
>
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
> 
> ------------------------------
> 
> End of Public-List Digest, Vol 3764, Issue 2
> ********************************************

compliment, 
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org