[Public-List] Barlow winch parts

Michael Connolly crufone at comcast.net
Fri Dec 28 06:13:49 PST 2018


Paul,
Check to see what the spring looks like. I once made a replacement spring out of a cut off Bobbie Pin. This was for a small winch on a Typhoon. That was 4 years ago and the owner has not had any problems. Check to be sure you use the correct lubricant.
Michael
> On December 27, 2018 at 7:45 PM Paul Wilson via Public-List <public-list at lists.alberg30.org> wrote:
> 
> 
> I have Barlow 24s mounted on the cockpit coamings. I took them off
> today--along with all the teak for stripping and varnishing. Anyway, I'm
> giving the winches a thorough servicing and noticed one of the winches has
> a broken pawl spring.
> 
> I've read on-line that Lewmar pawls and springs are compatible. Can anyone
> confirm? Hutton-Arco will sell you a Barlow NOS set of 4 pawls and 8
> springs for $38 (Australian) plus an unknown amount for shipping from Oz.
> http://www.arco-winches.com/products/spares
> 
> I may just do that--I'm in no hurry. On the hard until March (at least.)
> 
> Paul / Slainte #129
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



More information about the Public-List mailing list