[Public-List] Water tank deck fill

Marcelo Gentinetta vanguard64 at cox.net
Tue Jan 30 10:59:19 PST 2018


When you look at the underside of the cap, it has a flat flange which mates with a flat surface on the fill tube. There is no groove on the underside of the cap as there usually exists to fit an o-ring. 

> 
>     On January 30, 2018 at 10:09 AM "mahseer at kos.net" <mahseer at kos.net> wrote:
> 
>     No use a rubber “O” ring I don’t think a fibre washer would seal the filler.
>     John Boor
> 
>     Sent from my iPad
> 
>         > > 
> >         On Jan 29, 2018, at 8:50 PM, Marcelo D. Gentinetta via Public-List <public-list at lists.alberg30.org> wrote:
> > 
> >         I agree it should have something. Perhaps, I can find a flat fiber washer to fit the underside of the cap.
> > 
> >             > > > 
> > >             On Jan 29, 2018, at 6:30 PM, Mike Lehman via Public-List <public-list at lists.alberg30.org> wrote:
> > > 
> > >             Marcelo.
> > > 
> > >             The fill should have an "O" ring. If it does not change the the deck
> > >             fitting to one that does.
> > > 
> > >             On Jan 29, 2018 7:26 PM, "Marcelo D. Gentinetta via Public-List" <
> > >             public-list at lists.alberg30.org> wrote:
> > > 
> > >             Hi,
> > >             I have just finished repairing my water tank and lid leak and in the
> > >             process of replacing all the hoses. I also removed the water deck fill for
> > >             the tank for rebedding. I noticed that the water fill cap does not have an
> > >             o-ring but there appears to be no groove for one either. This is the first
> > >             time I have removed the cap since I purchased her last year since I knew
> > >             the tank was not usable at the time. My waste and fuel caps do have
> > >             o-rings. I wonder if the water fill cap is designed not to have an o-ring.
> > >             It is probably an old W-C brand.
> > >             If anyone knows, please let me know.
> > >             Thanks,
> > >             Marcelo
> > > 
> > >             #441 (Alegría)
> > > 
> > >             _______________________________________________
> > >             These businesses support your Association:
> > >             http://www.alberg30.org/store/A30supporters.html
> > >             Please support them.
> > > 
> > >             _______________________________________________
> > >             Public-List mailing list
> > >             Public-List at lists.alberg30.org
> > >             http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > 
> > >             _______________________________________________
> > >             These businesses support your Association:
> > >             http://www.alberg30.org/store/A30supporters.html
> > >             Please support them.
> > > 
> > >             _______________________________________________
> > >             Public-List mailing list
> > >             Public-List at lists.alberg30.org
> > >             http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > 
> > >         > > 
> >         _______________________________________________
> >         These businesses support your Association:
> >         http://www.alberg30.org/store/A30supporters.html
> >         Please support them.
> > 
> >         _______________________________________________
> >         Public-List mailing list
> >         Public-List at lists.alberg30.org
> >         http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > 
> >     > 



More information about the Public-List mailing list