[Public-List] Headstay Location

[Wes Gardner]

Hi All,

Mine's in the aft hole, I use the forward hole for a big U bolt to contain
my retractable sprit.

Wes

On Sat, Jan 27, 2018 at 11:55 AM, Gordon Laco via Public-List <
public-list at lists.alberg30.org> wrote:

> Your forestay should be at the forward hole...
>
> Gord
>  #426 Surprise
>
> On 2018-01-27, 11:48 AM, "Public-List on behalf of Daniel Swords via
> Public-List" <public-list-bounces at lists.alberg30.org on behalf of
> public-list at lists.alberg30.org> wrote:
>
>
>     The stemhead casting on my boat has three holes for attaching the
> headstay clevis pin. Currently the headstay is attached to the middle hole
> which is fine, but I am considering moving it to the forward hole as this
> would allow me to attach a removable inner-forestay to the aft hole without
> interfering with my roller furling drum. With my genoa furled I could then
> set up the inner-forestay for use with a hanked on jib in heavy weather.
> Has anyone tried attaching the headstay to the forward hole?  Thoughts on
> problems or concerns?Daniel SwordsSolitude (#525)Lake Pontchartrain
> Louisiana
>
>     Sent from Yahoo Mail for iPhone
>     _______________________________________________
>     These businesses support your Association:
>     http://www.alberg30.org/store/A30supporters.html
>     Please support them.
>     _______________________________________________
>     Public-List mailing list
>     Public-List at lists.alberg30.org
>     http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>