[Public-List] Water tank deck fill

[Marcelo D. Gentinetta]

I agree it should have something. Perhaps, I can find a flat fiber washer to fit the underside of the cap.

> On Jan 29, 2018, at 6:30 PM, Mike Lehman via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Marcelo.
> 
> The fill should have an "O" ring. If it does not change the the deck
> fitting to one that does.
> 
> On Jan 29, 2018 7:26 PM, "Marcelo D. Gentinetta via Public-List" <
> public-list at lists.alberg30.org> wrote:
> 
> Hi,
> I have just finished repairing my water tank and lid leak and in the
> process of replacing all the hoses. I also removed the water deck fill for
> the tank for rebedding. I noticed that the water fill cap does not have an
> o-ring but there appears to be no groove for one either. This is the first
> time I have removed the cap since I purchased her last year since I knew
> the tank was not usable at the time. My waste and fuel caps do have
> o-rings. I wonder if the water fill cap is designed not to have an o-ring.
> It is probably an old W-C brand.
> If anyone knows, please let me know.
> Thanks,
> Marcelo
> #441 (Alegría)
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org