[Public-List] Public-List Digest, Vol 3669, Issue 1

Wed Jul 4 02:20:51 PDT 2018

For me personally, the greatest advantage of the roller furler, is that i
can furl the sail in about one minute by pulling on a single line.
This means that i can depower the boat greatly very quickly, should the
need arise.
When I single hand, I can put the boat away much faster.

Flaking a jib by myself requires a lot more time and effort.
Less effort spent putting the boat away means more time and effort spent
sailing.

For racers in classes that allow it, one can raise a second jib in the
other slot of the furler before lowering the jib that was being used
previously.
As a result, the boat is never without a jib providing power and balancing
the helm.
In order to do this, one has to hoist the jibs without using the top swivel.

Jonathan

On Wed, Jul 4, 2018 at 12:07 AM, americo silva via Public-List <
public-list at lists.alberg30.org> wrote:

> I also am new to sailing and would like some explanation as to what the
> purpose of a roller furller is if not to roll it up when wind pipes up
> if replacing the sail with a smaller one is what is called for then I think
> hank on would be better than trying to switch roller furling sails
>
>
> On Tue, Jul 3, 2018 at 9:29 AM Daniel Swords via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > I live in Mandeville Louisiana and also sail my Alberg 30 on Lake
> > Pontchartrain (I did not know there was another A30 in this area). I
> > currently have a 135 genoa. For me that is too large and when I replace
> it
> > it will be with a 120 genoa (but I don’t race and am in no great hurry to
> > get anywhere). Despite what others say about not being able to use a
> furler
> > for reefing I find that I can furle my genoa about 10% and the sail still
> > will maintain a good shape.  Beyond that 10% (which isn’t a lot) it
> looses
> > its shape and looks embarrassing. I also disagree that that places
> damaging
> > strains on the sail but that is just my opinion, I am sure others know
> much
> > more than me. I would however love to have someone demonstrate to me how
> > they leave the cockpit, go to the bow of the boat, drop and stow a 150
> > genoa and replace it with a smaller sail in 15+ knots of wind while
> sailing
> > singlehanded. Hard enough to do with a hank on jib. I simply can not do
> it.
> > Of course, it would be nice if the winds were always steady enough that I
> > could select my headsail and reef my main in my slip, but that is not the
> > case on Lake Pontchartrain.
> > When I am sailing and decide I need to reef my sails I first generally
> put
> > one reef in the main, if the wind continues to increase my next step is
> to
> > roller furle my genoa about 10% (makes it about a 120 genoa), my third
> step
> > is a second reef in the main, after that I furle the jib to about the
> size
> > of a storm jib because I find that my boat doesn’t sail very well on just
> > the double reefed main and even a tiny bit of jib makes an improvement.
> > Beyond that I hove to.
> >
> > Pardon my including the entire digest in this reply, I can not figure out
> > a way not to. Daniel SwordsSolitude #525
> >
> >
> > Sent from Yahoo Mail for iPhone
> >
> >
> > On Tuesday, July 3, 2018, 7:18 AM, public-list-request at lists.
> alberg30.org
> > wrote:
> >
> > Send Public-List mailing list submissions to
> >     public-list at lists.alberg30.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >     http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > or, via email, send a message with subject or body 'help' to
> >     public-list-request at lists.alberg30.org
> >
> > You can reach the person managing the list at
> >     public-list-owner at lists.alberg30.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of Public-List digest..."
> >
> >
> > Please do NOT include the entire digest in your reply!
> > ======================================================
> >
> >
> >
> > Today's Topics:
> >
> >   1. New sails (Marcelo D. Gentinetta)
> >   2. Re: New sails (Michael Connolly)
> >   3. Re: New sails (Jonathan Bresler)
> >   4. Re: New sails (Gordon Laco)
> >   5. Re: New sails (Marcelo D. Gentinetta)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Mon, 2 Jul 2018 20:18:05 -0500
> > From: "Marcelo D. Gentinetta" <vanguard64 at cox.net>
> > To: Alberg 30 Public List -- open to all
> >     <public-list at lists.alberg30.org>
> > Subject: [Public-List] New sails
> > Message-ID: <42227BC8-C51A-42C4-9122-D026533294A4 at cox.net>
> > Content-Type: text/plain;    charset=utf-8
> >
> > Greetings from New Orleans.
> > I would like to field different opinions on the subject of sails,
> > specifically furler headsail size. I have started sailing my A30 just in
> > the last month after 1year spent refitting her. I bought her with a 10y
> old
> > mainsail that needs replacement and a 7y old 150% genoa (very good
> > condition but no foam in luff) on a Profurl furler. On my previous boat,
> > Pearson Vanguard, I had hank on headsails. So, I had a 90% jib, 125% and
> > 150% genoas and I would select them accordingly. Now, aside from seeing
> the
> > real convenience of a headsail furler, I find myself questioning what
> size
> > headsail would best fit most conditions encountered here throughout the
> > year. I am also planning on purchasing a new main but that is pretty
> > straightforward. Summer winds here are between 5-12k and then they pick
> up
> > in the fall, winter and spring. As fronts move in, we?ll go out in 15-20k
> > gusting to 25k. Over 25k we?ll usually stay in port. So here are some
> > options I have been toiling with.
> > 1. New main plus my present 150% genoa with added foam pad in the luff
> for
> > better shape when partially furled.
> > 2. New main plus a 125% genoa with foam pad luff ?fall/winter sail? and
> > keep the 150% as is for summer use.
> > 3. New main plus 135-140% genoa with foam pad luff and keep the 150% as
> > spare.
> >
> > I appreciate your input. Hopefully, it won?t be as contentious as anchor
> > selection.
> > Marcelo
> > #441 Alegr?a
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Tue, 3 Jul 2018 01:43:14 +0000 (UTC)
> > From: Michael Connolly <crufone at comcast.net>
> > To: Alberg 30 Public List -- open to all
> >     <public-list at lists.alberg30.org>
> > Subject: Re: [Public-List] New sails
> > Message-ID:
> >     <389732761.65203648.1530582194304.JavaMail.zimbra at comcast.net>
> > Content-Type: text/plain; charset=utf-8
> >
> > Marcelo,
> > My first reaction is option number 3. Bend on the 150 when you know it is
> > going to be light, i.e., summer time. What type of sailing do you do? Any
> > racing? Daysailing mostly?
> > The main would be good to have two reef points. If only one reef make it
> a
> > hefty one, like half way between what would be a first and second reef.
> If
> > you plan to have a loose footed main or a shelf in the foot fashion a
> > decent outhaul that can be employed on any point of sail.
> > BTW I dislike using the headsail furler for reefing. While your Vanguard
> > sail selection might be considered antiquated by todays standards I like
> > that style.
> > Happy sailing,
> > Michael #133
> >
> > ----- Original Message -----
> >
> > From: "Marcelo D. Gentinetta via Public-List" <
> > public-list at lists.alberg30.org>
> > To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.
> org>
> >
> > Cc: "Marcelo D. Gentinetta" <vanguard64 at cox.net>
> > Sent: Monday, July 2, 2018 9:18:05 PM
> > Subject: [Public-List] New sails
> >
> > Greetings from New Orleans.
> > I would like to field different opinions on the subject of sails,
> > specifically furler headsail size. I have started sailing my A30 just in
> > the last month after 1year spent refitting her. I bought her with a 10y
> old
> > mainsail that needs replacement and a 7y old 150% genoa (very good
> > condition but no foam in luff) on a Profurl furler. On my previous boat,
> > Pearson Vanguard, I had hank on headsails. So, I had a 90% jib, 125% and
> > 150% genoas and I would select them accordingly. Now, aside from seeing
> the
> > real convenience of a headsail furler, I find myself questioning what
> size
> > headsail would best fit most conditions encountered here throughout the
> > year. I am also planning on purchasing a new main but that is pretty
> > straightforward. Summer winds here are between 5-12k and then they pick
> up
> > in the fall, winter and spring. As fronts move in, we?ll go out in 15-20k
> > gusting to 25k. Over 25k we?ll usually stay in port. So here are some
> > options I have been toiling with.
> > 1. New main plus my present 150% genoa with added foam pad in the luff
> for
> > better shape when partially furled.
> > 2. New main plus a 125% genoa with foam pad luff ?fall/winter sail? and
> > keep the 150% as is for summer use.
> > 3. New main plus 135-140% genoa with foam pad luff and keep the 150% as
> > spare.
> >
> > I appreciate your input. Hopefully, it won?t be as contentious as anchor
> > selection.
> > Marcelo
> > #441 Alegr?a
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Tue, 3 Jul 2018 05:35:15 -0400
> > From: Jonathan Bresler <262alberg30 at gmail.com>
> > To: Alberg 30 Public List -- open to all
> >     <public-list at lists.alberg30.org>
> > Subject: Re: [Public-List] New sails
> > Message-ID:
> >     <CAHEe8TsA_S0RQqGC7+1Y_r2sTafdVRsD-6u78KfZNONBxnNW1Q at mail.gmail.com>
> > Content-Type: text/plain; charset="UTF-8"
> >
> > Marcelo,
> >
> > Suggest not using the furler for reefing.  Even with foam in the luff,
> the
> > sail does not set near as well as it does when fully deployed.  The
> > stresses placed on the sail by the higher wind speeds fall at locations
> > that are not designed to handle them....no tack and head patches
> increasing
> > the thickness of the sail from single ply to two, three or more.
> >
> > Would suggest removing the larger sail from the furler and sliding a
> > smaller one up the slot in higher winds.  This is what I will be doing,
> > once i purchase a smaller headsail.
> >
> > Agree with you fully regarding the convenience of a headsail furler.  I
> > singlehand a lot, folding a sail alone is a real hassle.  Would be
> tempted
> > to sail less if I had to do so regularly.
> >
> > Jonathan
> >
> > On Mon, Jul 2, 2018 at 9:43 PM, Michael Connolly via Public-List <
> > public-list at lists.alberg30.org> wrote:
> >
> > > Marcelo,
> > > My first reaction is option number 3. Bend on the 150 when you know it
> is
> > > going to be light, i.e., summer time. What type of sailing do you do?
> Any
> > > racing? Daysailing mostly?
> > > The main would be good to have two reef points. If only one reef make
> it
> > a
> > > hefty one, like half way between what would be a first and second reef.
> > If
> > > you plan to have a loose footed main or a shelf in the foot fashion a
> > > decent outhaul that can be employed on any point of sail.
> > > BTW I dislike using the headsail furler for reefing. While your
> Vanguard
> > > sail selection might be considered antiquated by todays standards I
> like
> > > that style.
> > > Happy sailing,
> > > Michael #133
> > >
> > > ----- Original Message -----
> > >
> > > From: "Marcelo D. Gentinetta via Public-List"
> > <public-list at lists.alberg30.
> > > org>
> > > To: "Alberg 30 Public List -- open to all" <
> > public-list at lists.alberg30.org>
> > >
> > > Cc: "Marcelo D. Gentinetta" <vanguard64 at cox.net>
> > > Sent: Monday, July 2, 2018 9:18:05 PM
> > > Subject: [Public-List] New sails
> > >
> > > Greetings from New Orleans.
> > > I would like to field different opinions on the subject of sails,
> > > specifically furler headsail size. I have started sailing my A30 just
> in
> > > the last month after 1year spent refitting her. I bought her with a 10y
> > old
> > > mainsail that needs replacement and a 7y old 150% genoa (very good
> > > condition but no foam in luff) on a Profurl furler. On my previous
> boat,
> > > Pearson Vanguard, I had hank on headsails. So, I had a 90% jib, 125%
> and
> > > 150% genoas and I would select them accordingly. Now, aside from seeing
> > the
> > > real convenience of a headsail furler, I find myself questioning what
> > size
> > > headsail would best fit most conditions encountered here throughout the
> > > year. I am also planning on purchasing a new main but that is pretty
> > > straightforward. Summer winds here are between 5-12k and then they pick
> > up
> > > in the fall, winter and spring. As fronts move in, we?ll go out in
> 15-20k
> > > gusting to 25k. Over 25k we?ll usually stay in port. So here are some
> > > options I have been toiling with.
> > > 1. New main plus my present 150% genoa with added foam pad in the luff
> > for
> > > better shape when partially furled.
> > > 2. New main plus a 125% genoa with foam pad luff ?fall/winter sail? and
> > > keep the 150% as is for summer use.
> > > 3. New main plus 135-140% genoa with foam pad luff and keep the 150% as
> > > spare.
> > >
> > > I appreciate your input. Hopefully, it won?t be as contentious as
> anchor
> > > selection.
> > > Marcelo
> > > #441 Alegr?a
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> >
> >
> >
> > --
> > Jonathan M Bresler
> > S/V Constance Alberg 30 #262
> > Annapolis/Eastport MD
> >
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Tue, 3 Jul 2018 08:01:05 -0400
> > From: Gordon Laco <mainstay at csolve.net>
> > To: Alberg 30 Public List -- open to all
> >     <public-list at lists.alberg30.org>
> > Subject: Re: [Public-List] New sails
> > Message-ID: <A5B0FA11-089A-483B-831D-F472FB520BB6 at csolve.net>
> > Content-Type: text/plain;    charset=utf-8
> >
> > I agree completely?
> >
> > You should still change sails as required as you did before? but it will
> > be easier and quicker than with hanks.  I?d suggest a 150 for everyday,
> and
> > a smaller sail for heavier air is a good combination.
> >
> > Gordon Laco
> > #426 Surprise
> >
> >
> >
> >
> > > On Jul 3, 2018, at 5:35 AM, Jonathan Bresler via Public-List <
> > public-list at lists.alberg30.org> wrote:
> > >
> > > Marcelo,
> > >
> > > Suggest not using the furler for reefing.  Even with foam in the luff,
> > the
> > > sail does not set near as well as it does when fully deployed.  The
> > > stresses placed on the sail by the higher wind speeds fall at locations
> > > that are not designed to handle them....no tack and head patches
> > increasing
> > > the thickness of the sail from single ply to two, three or more.
> > >
> > > Would suggest removing the larger sail from the furler and sliding a
> > > smaller one up the slot in higher winds.  This is what I will be doing,
> > > once i purchase a smaller headsail.
> > >
> > > Agree with you fully regarding the convenience of a headsail furler.  I
> > > singlehand a lot, folding a sail alone is a real hassle.  Would be
> > tempted
> > > to sail less if I had to do so regularly.
> > >
> > > Jonathan
> > >
> > > On Mon, Jul 2, 2018 at 9:43 PM, Michael Connolly via Public-List <
> > > public-list at lists.alberg30.org> wrote:
> > >
> > >> Marcelo,
> > >> My first reaction is option number 3. Bend on the 150 when you know it
> > is
> > >> going to be light, i.e., summer time. What type of sailing do you do?
> > Any
> > >> racing? Daysailing mostly?
> > >> The main would be good to have two reef points. If only one reef make
> > it a
> > >> hefty one, like half way between what would be a first and second
> reef.
> > If
> > >> you plan to have a loose footed main or a shelf in the foot fashion a
> > >> decent outhaul that can be employed on any point of sail.
> > >> BTW I dislike using the headsail furler for reefing. While your
> Vanguard
> > >> sail selection might be considered antiquated by todays standards I
> like
> > >> that style.
> > >> Happy sailing,
> > >> Michael #133
> > >>
> > >> ----- Original Message -----
> > >>
> > >> From: "Marcelo D. Gentinetta via Public-List"
> > <public-list at lists.alberg30.
> > >> org>
> > >> To: "Alberg 30 Public List -- open to all" <
> > public-list at lists.alberg30.org>
> > >>
> > >> Cc: "Marcelo D. Gentinetta" <vanguard64 at cox.net>
> > >> Sent: Monday, July 2, 2018 9:18:05 PM
> > >> Subject: [Public-List] New sails
> > >>
> > >> Greetings from New Orleans.
> > >> I would like to field different opinions on the subject of sails,
> > >> specifically furler headsail size. I have started sailing my A30 just
> in
> > >> the last month after 1year spent refitting her. I bought her with a
> 10y
> > old
> > >> mainsail that needs replacement and a 7y old 150% genoa (very good
> > >> condition but no foam in luff) on a Profurl furler. On my previous
> boat,
> > >> Pearson Vanguard, I had hank on headsails. So, I had a 90% jib, 125%
> and
> > >> 150% genoas and I would select them accordingly. Now, aside from
> seeing
> > the
> > >> real convenience of a headsail furler, I find myself questioning what
> > size
> > >> headsail would best fit most conditions encountered here throughout
> the
> > >> year. I am also planning on purchasing a new main but that is pretty
> > >> straightforward. Summer winds here are between 5-12k and then they
> pick
> > up
> > >> in the fall, winter and spring. As fronts move in, we?ll go out in
> > 15-20k
> > >> gusting to 25k. Over 25k we?ll usually stay in port. So here are some
> > >> options I have been toiling with.
> > >> 1. New main plus my present 150% genoa with added foam pad in the luff
> > for
> > >> better shape when partially furled.
> > >> 2. New main plus a 125% genoa with foam pad luff ?fall/winter sail?
> and
> > >> keep the 150% as is for summer use.
> > >> 3. New main plus 135-140% genoa with foam pad luff and keep the 150%
> as
> > >> spare.
> > >>
> > >> I appreciate your input. Hopefully, it won?t be as contentious as
> anchor
> > >> selection.
> > >> Marcelo
> > >> #441 Alegr?a
> > >> _______________________________________________
> > >> These businesses support your Association:
> > >> http://www.alberg30.org/store/A30supporters.html
> > >> Please support them.
> > >> _______________________________________________
> > >> Public-List mailing list
> > >> Public-List at lists.alberg30.org
> > >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >>
> > >> _______________________________________________
> > >> These businesses support your Association:
> > >> http://www.alberg30.org/store/A30supporters.html
> > >> Please support them.
> > >> _______________________________________________
> > >> Public-List mailing list
> > >> Public-List at lists.alberg30.org
> > >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >>
> > >
> > >
> > >
> > > --
> > > Jonathan M Bresler
> > > S/V Constance Alberg 30 #262
> > > Annapolis/Eastport MD
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> >
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Tue, 3 Jul 2018 07:18:05 -0500
> > From: "Marcelo D. Gentinetta" <vanguard64 at cox.net>
> > To: Alberg 30 Public List -- open to all
> >     <public-list at lists.alberg30.org>
> > Subject: Re: [Public-List] New sails
> > Message-ID: <92C84D1D-984D-4D3C-895B-0076BCBA7837 at cox.net>
> > Content-Type: text/plain;    charset=utf-8
> >
> > Thanks for all the good input. This of course generates more questions.
> > 1. Don mentions sailing with just the 135% out in winds over 25k. My
> > understanding of this is that this arrangement places more stress on the
> > mast due to pumping of the rig. Is this a fallacy?
> > 2. My present main has jacklines at the luff to accommodate reefing and
> > also to offset the tack aft. Is this the standard arrangement or are
> there
> > other ways to achieve the same purpose?
> > 3. So if I refrain from using the furler to reduce headsail size which I
> > understand may damage the sail, what is the best order of sail reduction
> > and still maintain balance? Main 1st reef, 2nd reef, headsail only?
> >
> >
> >
> >
> > > On Jul 3, 2018, at 7:01 AM, Gordon Laco via Public-List <
> > public-list at lists.alberg30.org> wrote:
> > >
> > > I agree completely?
> > >
> > > You should still change sails as required as you did before? but it
> will
> > be easier and quicker than with hanks.  I?d suggest a 150 for everyday,
> and
> > a smaller sail for heavier air is a good combination.
> > >
> > > Gordon Laco
> > > #426 Surprise
> > >
> > >
> > >
> > >
> > >> On Jul 3, 2018, at 5:35 AM, Jonathan Bresler via Public-List <
> > public-list at lists.alberg30.org> wrote:
> > >>
> > >> Marcelo,
> > >>
> > >> Suggest not using the furler for reefing.  Even with foam in the luff,
> > the
> > >> sail does not set near as well as it does when fully deployed.  The
> > >> stresses placed on the sail by the higher wind speeds fall at
> locations
> > >> that are not designed to handle them....no tack and head patches
> > increasing
> > >> the thickness of the sail from single ply to two, three or more.
> > >>
> > >> Would suggest removing the larger sail from the furler and sliding a
> > >> smaller one up the slot in higher winds.  This is what I will be
> doing,
> > >> once i purchase a smaller headsail.
> > >>
> > >> Agree with you fully regarding the convenience of a headsail furler.
> I
> > >> singlehand a lot, folding a sail alone is a real hassle.  Would be
> > tempted
> > >> to sail less if I had to do so regularly.
> > >>
> > >> Jonathan
> > >>
> > >> On Mon, Jul 2, 2018 at 9:43 PM, Michael Connolly via Public-List <
> > >> public-list at lists.alberg30.org> wrote:
> > >>
> > >>> Marcelo,
> > >>> My first reaction is option number 3. Bend on the 150 when you know
> it
> > is
> > >>> going to be light, i.e., summer time. What type of sailing do you do?
> > Any
> > >>> racing? Daysailing mostly?
> > >>> The main would be good to have two reef points. If only one reef make
> > it a
> > >>> hefty one, like half way between what would be a first and second
> > reef. If
> > >>> you plan to have a loose footed main or a shelf in the foot fashion a
> > >>> decent outhaul that can be employed on any point of sail.
> > >>> BTW I dislike using the headsail furler for reefing. While your
> > Vanguard
> > >>> sail selection might be considered antiquated by todays standards I
> > like
> > >>> that style.
> > >>> Happy sailing,
> > >>> Michael #133
> > >>>
> > >>> ----- Original Message -----
> > >>>
> > >>> From: "Marcelo D. Gentinetta via Public-List"
> > <public-list at lists.alberg30.
> > >>> org>
> > >>> To: "Alberg 30 Public List -- open to all" <
> > public-list at lists.alberg30.org>
> > >>>
> > >>> Cc: "Marcelo D. Gentinetta" <vanguard64 at cox.net>
> > >>> Sent: Monday, July 2, 2018 9:18:05 PM
> > >>> Subject: [Public-List] New sails
> > >>>
> > >>> Greetings from New Orleans.
> > >>> I would like to field different opinions on the subject of sails,
> > >>> specifically furler headsail size. I have started sailing my A30 just
> > in
> > >>> the last month after 1year spent refitting her. I bought her with a
> > 10y old
> > >>> mainsail that needs replacement and a 7y old 150% genoa (very good
> > >>> condition but no foam in luff) on a Profurl furler. On my previous
> > boat,
> > >>> Pearson Vanguard, I had hank on headsails. So, I had a 90% jib, 125%
> > and
> > >>> 150% genoas and I would select them accordingly. Now, aside from
> > seeing the
> > >>> real convenience of a headsail furler, I find myself questioning what
> > size
> > >>> headsail would best fit most conditions encountered here throughout
> the
> > >>> year. I am also planning on purchasing a new main but that is pretty
> > >>> straightforward. Summer winds here are between 5-12k and then they
> > pick up
> > >>> in the fall, winter and spring. As fronts move in, we?ll go out in
> > 15-20k
> > >>> gusting to 25k. Over 25k we?ll usually stay in port. So here are some
> > >>> options I have been toiling with.
> > >>> 1. New main plus my present 150% genoa with added foam pad in the
> luff
> > for
> > >>> better shape when partially furled.
> > >>> 2. New main plus a 125% genoa with foam pad luff ?fall/winter sail?
> and
> > >>> keep the 150% as is for summer use.
> > >>> 3. New main plus 135-140% genoa with foam pad luff and keep the 150%
> as
> > >>> spare.
> > >>>
> > >>> I appreciate your input. Hopefully, it won?t be as contentious as
> > anchor
> > >>> selection.
> > >>> Marcelo
> > >>> #441 Alegr?a
> > >>> _______________________________________________
> > >>> These businesses support your Association:
> > >>> http://www.alberg30.org/store/A30supporters.html
> > >>> Please support them.
> > >>> _______________________________________________
> > >>> Public-List mailing list
> > >>> Public-List at lists.alberg30.org
> > >>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >>>
> > >>> _______________________________________________
> > >>> These businesses support your Association:
> > >>> http://www.alberg30.org/store/A30supporters.html
> > >>> Please support them.
> > >>> _______________________________________________
> > >>> Public-List mailing list
> > >>> Public-List at lists.alberg30.org
> > >>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >>>
> > >>
> > >>
> > >>
> > >> --
> > >> Jonathan M Bresler
> > >> S/V Constance Alberg 30 #262
> > >> Annapolis/Eastport MD
> > >> _______________________________________________
> > >> These businesses support your Association:
> > >> http://www.alberg30.org/store/A30supporters.html
> > >> Please support them.
> > >> _______________________________________________
> > >> Public-List mailing list
> > >> Public-List at lists.alberg30.org
> > >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> >
> > ------------------------------
> >
> > End of Public-List Digest, Vol 3669, Issue 1
> > ********************************************
> >
> >
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>

-- 
Jonathan M Bresler
S/V Constance Alberg 30 #262
Annapolis/Eastport MD