[Public-List] Damn screws

Sun Jun 3 18:54:21 PDT 2018

screw bits are not that expensive must b a hardeware store around

On Sun, Jun 3, 2018 at 11:23 AM, Kris Coward via Public-List <
public-list at lists.alberg30.org> wrote:

>
> I thought song was reserved for when a blowtorch is used for a little
> extra coaxing (in non-melty ways).
>
> -K
>
> On Sun, Jun 03, 2018 at 10:22:26AM -0400, Gordon Laco via Public-List
> wrote:
> > Oh yes, George, those screws are coming out… intact.    They can come
> out the easy way, or the hard way… but they are coning out.   Oh yes…
> hahah…. mmmm yes…. out they will come…
> >
> > George is heard to be humming a tune that slowly becomes recognizable…
> it’s the old 1970’s disco tune, a brand of horror particular to those who
> were in university during those years when music fell to new lows… ‘TURN
> baby TURN, it’s a disco inferno, TURN baby TURN…'
> >
> > https://www.youtube.com/watch?v=A_sY2rjxq6M <https://www.youtube.com/
> watch?v=A_sY2rjxq6M>
> >
> > Gordon Laco
> > www.gordonlaco.com
> >
> >
> >
> >
> > > On Jun 3, 2018, at 10:13 AM, Rod Symmes via Public-List <
> public-list at lists.alberg30.org> wrote:
> > >
> > > O O
> > >   I
> > >   ^
> > >
> > > I just felt a cold chill run down my spine.
> > >
> > >  Rod
> > >
> > >
> > > -------- Original message --------
> > > From: Gordon Laco via Public-List
> > > Date:03-06-2018 9:30 AM (GMT-05:00)
> > > To: Alberg 30 Public List -- open to all
> > > Cc: Gordon Laco
> > > Subject: Re: [Public-List] Damn screws
> > >
> > > If you can arrange to the grinding within visual range of the screws
> in question, I expect you’ll find you gain heavily with regard to moral
> ascendancy over them.  I’m referring to the horror-inducing part of
> medieval torture procedure where the order ‘show him the instruments’ is
> given, and the various devices about to be used are uncovered.  That was
> intended as a last-chance for the object to reverse their resisting
> position and cooperate.  It works for screws resisting removal.  I’m
> picturing you chuckling as the sparks fly from the grinding wheel as you
> hone down your screw driver points to what will fit the screws better.
>  The room is in partial darkness but for a bit of a gleam on the screws
> tightly locked in place in the pump, on your workbench… that gleam also
> catching your eyes as the showers of sparks fly, and an evil chuckle comes
> from your throat…  quick glances from your work to the screw heads and back
> leaving no doubt as to what comes next…
> > >
> > > Gordon Laco
> > > www.gordonlaco.com
> > >
> > >
> > >
> > >
> > >> On Jun 2, 2018, at 8:51 PM, Michael Connolly via Public-List <
> public-list at lists.alberg30.org> wrote:
> > >>
> > >> George,
> > >> Use a grinding wheel to make your bit fit the offending
> screw................ Purchase a replaceable tip for a screw driver and
> grind it to the proper fit....................... Can't do that purchase a
> drill bit larger than the width of the screw head and grind that down to
> fit the screw head, chuck into your impact, tool and impact away.
> > >> Michael
> > >>
> > >>
> > >> ----- Original Message -----
> > >>
> > >> From: "George Dinwiddie via Public-List" <public-list at lists.alberg30.
> org>
> > >> To: public-list at lists.alberg30.org
> > >> Cc: "George Dinwiddie" <gdinwiddie at alberg30.org>
> > >> Sent: Friday, June 1, 2018 12:35:37 PM
> > >> Subject: Re: [Public-List] Damn screws
> > >>
> > >> On 6/1/18 12:09 PM, americo silva via Public-List wrote:
> > >>> get a manual impact screwdriver the kind that you hit with a hammer
> > >>
> > >> I've got one, but the smallest screwdriver tip doesn't fit the
> screw's slot.
> > >>
> > >> - George
> > >>
> > >> --
> > >> ------------------------------------------------------------
> ----------
> > >> When I remember bygone days George Dinwiddie
> > >> I think how evening follows morn; gdinwiddie at alberg30.org
> > >> So many I loved were not yet dead, http://www.Alberg30.org
> > >> So many I love were not yet born. also see:
> > >> 'The Middle' by Ogden Nash http://idiacomputing.com
> > >> ------------------------------------------------------------
> ----------
> > >>
> > >>
> > >>
> > >> _______________________________________________
> > >> These businesses support your Association:
> > >> http://www.alberg30.org/store/A30supporters.html
> > >> Please support them.
> > >> _______________________________________________
> > >> Public-List mailing list
> > >> Public-List at lists.alberg30.org
> > >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >>
> > >> _______________________________________________
> > >> These businesses support your Association:
> > >> http://www.alberg30.org/store/A30supporters.html
> > >> Please support them.
> > >> _______________________________________________
> > >> Public-List mailing list
> > >> Public-List at lists.alberg30.org
> > >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
> --
> Kris Coward                                     http://unripe.melon.org/
> GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>